Read Sharp MX-FN27 (serv.man15) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
Date:
1
3th
Sept 2016
Model:
See below
Ref.:
CCE 1594
Colour:
White
Page:
1 of 2
TECHNICAL BULLETIN
ADDITION OF CABLE TIE TO HARNESS
1. Model Name:
MX-PN14B/C/D
2. Description:
Depending on the route of the wiring harness, the loosened harness interferes with the
moving parts, which may disconnect the harness. For the purpose to prevent the
harness from loosening, the cable tie has been added to the harness.
Location where the cable tie has been added:
Before change
After change
Depending on the way of wiring of the harness,
the portion where the harness is loosen may
get closer to the sensor detection area.
the portion where the harness is loosen may
get closer to the sensor detection area.
Location is controlled with the edge
saddle by adding the cable tie.
saddle by adding the cable tie.
Sharp Electronics (UK) Ltd., Document Systems Support
3. Action:
From November 2015 production
4. Parts Action:
Ref.
No.
Model
name
Version P/G No.
Current parts
New parts
Price
rank
Q'ty
Parts name
Effective
time
Inter-
change-
ability
Parts code
Parts code
1
MX-PN14B
MX-PN14C
MX-PN14C
ALL
17-41
0CW4G575150// 0CW4G57515003
AR
1
CABLE_SEN2_PUNC
H
H
2015/11
1
2
MX-PN14D
17-14
0CW4G575160// 0CW4G57516002
BB
1
CABLE_SEN2-1_PUN
CH
CH
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Display