Read Sharp MX-FN24 / MX-FN25 Service Manual online
MX-FN25 MAINTENANCE LIST 2 – 1
MX-FN25
Service Manual
[2] MAINTENANCE LIST
✕
: Check : Clean : Replace : Adjust ✩ : Lubricate : Shift position
(Clean, replace, or adjust as needed.)
NOTE: Discharge brush cleaning
Wipe the brush with wet cloth with a small amount of water. (Recommend)
Handle the brush carefully.
Wipe the brush with wet cloth with a small amount of water. (Recommend)
Handle the brush carefully.
Unit name
No.
Part name
When
calling
calling
500K
1000K
1500K
2000K
2500K
3000K
Life judgement
(Reference)
Tool, oil, chemicals
Procedure
Treatment after
procedure
Finisher
(for 85-sheet
machine)
[MX-FNX6]
(for 90-sheet
machine)
[MX-FN24]
(for 85-sheet
machine)
[MX-FNX6]
(for 90-sheet
machine)
[MX-FN24]
1
Transport rollers
✕
When there is dirt,
wipe with wet cloth
and water.
wipe with wet cloth
and water.
2
Transport paper guide
✕
When there is dirt,
wipe with wet cloth
and water.
wipe with wet cloth
and water.
3
Gears
✕ ✕ ✕ ✕ ✕ ✕ ✕
UKOG-0307FCZZ
4
Discharge brush
✕ ✕ ✕ ✕ ✕ ✕ ✕
When there is dirt,
wipe brush part with
wet cloth and water.
* Refer to the NOTE:
wipe brush part with
wet cloth and water.
* Refer to the NOTE:
5
Sintered bearing
✕ ✕ ✕ ✕ ✕ ✕ ✕
Lubricate when an
abnormal sound is
heard.
abnormal sound is
heard.
Tellus oil:
0CW4110K701//
0CW4110K701//
6
Sensor
✕
Clean by air
7
Edge binding stapler
Replacement reference: Replace the unit after 500K of staple.
8
Punch
Replacement reference: Replace the unit after 1,000K of panch.
9
Drag roller
✕
Saddle
finisher
(for 85-sheet
machine)
[MX-FNX7]
(for 90-sheet
machine)
[MX-FN25]
finisher
(for 85-sheet
machine)
[MX-FNX7]
(for 90-sheet
machine)
[MX-FN25]
1
Drive roller
✕
When there is dirt,
wipe with wet cloth
and water.
wipe with wet cloth
and water.
2
Follower roller
✕
When there is dirt,
wipe with wet cloth
and water.
wipe with wet cloth
and water.
3
Discharge brush
✕ ✕ ✕ ✕ ✕ ✕ ✕
When there is dirt,
wipe brush part with
wet cloth and water.
* Refer to the NOTE:
wipe brush part with
wet cloth and water.
* Refer to the NOTE:
4
Sintered bearing
✕ ✕ ✕ ✕ ✕ ✕ ✕
Lubricate when an
abnormal sound is
heard.
abnormal sound is
heard.
Silicon oil
5
Sensor
✕
Clean by air
6
Edge binding stapler
Replacement reference: Replace the unit after 500K of staple.
7
Center binding stapler
Replacement reference: Replace the unit after 200K of staple.
8
Punch
Replacement reference: Replace the unit after 1,000K of panch.
9
Drag roller
✕
Click on the first or last page to see other MX-FN24 / MX-FN25 service manuals if exist.