MX-FN21, MX-FN22 (serv.man33). Stack Limit for Half Fold and Z-Fold books on MX-FN21 and MX-FN22 - Sharp Copying Equipment Technical Bulletin (repair manual)

mx-fn21, mx-fn22 (serv.man33) technical bulletin
Model
MX-FN21 MX-FN22 (serv.man33)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
309.18 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Stack Limit for Half Fold and Z-Fold books on MX-FN21 and MX-FN22
File
mx-fn21-mx-fn22-sm33.pdf
Date

Read Sharp MX-FN21 / MX-FN22 (serv.man33) Technical Bulletin online

 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Outline 
 
This setting changes the limit for the number of stacking for Half-Fold/Z-Fold. 
This is a response to the field claim that the number of stacking available for Half-Fold/Z-Fold is too 
small. 
 
If this setting is not done (Factory Setting) 
-Full is detected at 30-sheets for B4/A3/LDR. 
-Full is detected at 10-sheets for A4-R/LT-R/LGL. 
 
 
Countermeasure 
 
If it is a job of Half-Fold/Z-Fold and Offset Tray is specified as the output tray; 
-Full is detected at 100-sheets for Half-Fold. 
-Full is detected at 50-sheets for Z-Fold. 
(However, the stacking performance is not guaranteed.) 
 
How to set finisher service mode 
 
Outline 
The service mode adjustments are performed with SW1 (Push SW), SW2 (Push SW), SW3 (DIP 
SW) LED1 and LED2. 
 
Details 
Supply the power with SW3 on the finisher PWB all OFF, and set SW3 for a service mode 
adjustment. Then press SW1 for 2 sec, and the service mode adjustment is started. 
When a service mode adjustment is not performed, LED1 repeats 0.5sec ON and 0.5sec OFF 
Changing the stack limit for Half-
Fold/Z-Fold 
TECHNICAL BULLETIN 
 
Date:  
February 2013 
Model:  
MX-FN22/FN21 
Ref.:   
 
Colour:  
White 
Page:  
1 of 2 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
 
 
 
 
 
 
 
 
 
Setting for cancel of stack limit for Half-Fold/Z-Fold 
 
 Details 
 
○ 
Operation start conditions 
(1) With SW3 all OFF, turn ON the power. 
(2) Set SW3 as shown below, and press SW1 for 2 sec. 
 
SW3                   1   2    3   4 
ON■/OFF□ ■ ■ □ ■ 
 
○ 
Operation end conditions 
(1) With SW3 all OFF, turn OFF the power. 
 
○ 
Setting procedures 
(1) The current set value is indicated by LED1 and LED2. 
(2) If the setting for cancel of stack limit is disabled, press SW1. 
If the setting for cancel of stack limit is enabled, press SW2. 
(3) LED1 and LED2 turn ON for 500 ms. 
(4) The new set value is indicated by LED1 and LED2. 
(5) Press SW1 for 2 sec to write the new set value into the EEPROM. 
Press SW2 for 2 sec to cancel the setting. 
(6) LED2 turns OFF, and LED1 repeats 0.5 sec ON → 0.5 sec OFF. 
 
○ 
Setting range 
1 [The setting for cancel of stack limit is disabled] or 2 [The setting for cancel of stack limit is 
enabled] 
(Default value: 1 [The setting for cancel of stack limit is disabled]) 
Page of 2
Display

Download Sharp MX-FN21 / MX-FN22 (serv.man33) Technical Bulletin

Here you can read online and download Sharp MX-FN21 / MX-FN22 (serv.man33) Technical Bulletin in PDF. MX-FN21 / MX-FN22 (serv.man33) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp MX-FN21 / MX-FN22 (serv.man33) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.