Read Sharp MX-FN21 / MX-FN22 / MX-PN13 (serv.man4) Service Manual online
MX-7040N MX-6240N/7040N (MAIN UNIT) 2 – 3
(2) Scanner (2/3 mirror unit) lock release
1)
Remove the optical unit fixing screw, and remove the note
label.
label.
C. Attach the operation panel
1)
Attach the operation panel mounting plate (Packed items) to
the operation panel (Packed items), and fix by the screw (M4 x
8 S-tight) (Packed items). Attach the operation section cover B
(Packed items), and fix by the screw (M3 x 8 S-tight) (Packed
items).
the operation panel (Packed items), and fix by the screw (M4 x
8 S-tight) (Packed items). Attach the operation section cover B
(Packed items), and fix by the screw (M3 x 8 S-tight) (Packed
items).
2)
Open the right door.
3)
Remove the screw and remove the upper cabinet front right.
Disconnect the connector from the USB I/F PWB.
Disconnect the connector from the USB I/F PWB.
4)
Remove the screws and remove the front cabinet upper.
5)
Attach the operation panel by fixing the screws (M4 x 8 S-tight)
(Packed items).
(Packed items).
6)
Attach the wire saddle (S) and wire saddle (M), and fix the har-
ness to the wire saddle.
ness to the wire saddle.
NOTE: Check to confirm that the harness does not enter the
panel.
For the reference, refer to the figure below.
For the reference, refer to the figure below.
2
1
3
2
4
2
1
1
1
3
Click on the first or last page to see other MX-FN21 / MX-FN22 / MX-PN13 (serv.man4) service manuals if exist.