Read Sharp MX-FN21 / MX-FN22 / MX-PN13 (serv.man3) Service Manual online
2
2
2-6
2-6
TECHNICAL DESCRIPTIONS > Transport Section
TECHNICAL DESCRIPTIONS > Transport Section
The paper surface on the load tray section (upper tray / lower tray) is detected by the light
emitting section (PBA600) and the light receiving section (PBA700) of the tray paper surface
sensor (Finisher Paper Level Sensor / Finisher Paper Level Detector).
When the tray paper surface sensor is shielded to detect paper, the load tray is lowered by
2mm.
emitting section (PBA600) and the light receiving section (PBA700) of the tray paper surface
sensor (Finisher Paper Level Sensor / Finisher Paper Level Detector).
When the tray paper surface sensor is shielded to detect paper, the load tray is lowered by
2mm.
Paper
Load tray
PBA600
Light
emitting
section
emitting
section
Load tray
Paper
Light
receiving
section
receiving
section
PBA600
PBA700
PBA700
F-2-12
Process tray transport operation
When the shift operation or the staple operation is performed, this machine loads paper on
the process tray section and then discharges paper to the load tray section.
Paper loaded on the process tray is subject to the shift operation or the staple operation,
then discharged to the load tray section by the gripper.
the process tray section and then discharges paper to the load tray section.
Paper loaded on the process tray is subject to the shift operation or the staple operation,
then discharged to the load tray section by the gripper.
Gripper
In the shift operation, the number of sheets of the bundle discharged to the load tray section
is as shown in the table below.
is as shown in the table below.
Number of sheets of bundle
Plain paper
Coated paper
/Heavy paper
Paper length>216mm
3 sheets
2 sheets
216mm ≧ Paper length
4 sheets
F-2-13
T-2-4
Click on the first or last page to see other MX-FN21 / MX-FN22 / MX-PN13 (serv.man3) service manuals if exist.