Read Sharp MX-FN19 / MX-FN20 / MX-PN12 Specification online
MX-FN19 SPECIFICATIONS 1 – 1
MX-FN19
Service Manual
[1] SPECIFICATIONS
1. Finisher/Saddle Finisher
Model
MX-FN19
MX-FN20
Name
Finisher
Saddle finisher
Type
Floor stand type
Transport reference
Center reference
Stack system
Upper/lower: Lift type offset tray
Upper/lower: Lift type offset tray and saddle stitch
delivery tray
delivery tray
Mode type
Non staple, staple
Non staple, staple, saddle stitch
Reliability
MCBJ: Conforms to the main unit
MCBF: Conforms to the main unit
MCBF: Conforms to the main unit
Life
Conforms to the main unit
Power consumption
125W
125W
Power source
Supplied to the main unit
Dimensions
(with the paper exit tray stored)
(with the paper exit tray stored)
530mmx662mmx1100mm
21.9x26.1x43.3 inch
21.9x26.1x43.3 inch
642mmx662mmx1100mm
25.3x26.1x43.3 inch
25.3x26.1x43.3 inch
Dimensions
(with the paper exit tray pulled out)
(with the paper exit tray pulled out)
660 mmx662mmx1100mm
26.0x26.1x43.3 inch
26.0x26.1x43.3 inch
772 mmx662mmx1100mm
30.4x26.1x43.3 inch
30.4x26.1x43.3 inch
Weight
Approx. 42kg 92.6lbs
Approx. 72kg 158.7lbs
Stacker section
Size/weight of paper to be delivered
Size/weight of paper to be delivered
Refer to Table 1
Size/weight of paper to be offset
Offset
Offset
30mm
Stacking performance
Non offset
Horizontal offset: 30mm or less, top offset: 50 mm or less,
(in the non staple mode on the offset tray)
(in the non staple mode on the offset tray)
Horizontal offset: 30mm or less, top offset: 50 mm or less,
(in the non staple mode on the offset tray)
(in the non staple mode on the offset tray)
Offset
Horizontal offset in stack:15mm or less, horizontal offset
between stacks: 15mm or more
between stacks: 15mm or more
Alignment performance
Max. offset width: 2.5mm
Paper detection
Available
Output paper capacity
Upper tray
Plain paper S size: Height 225.4mm
± mm (Corresponding to 1,550 sheets)
(Non-sort)
Plain paper L size: Height 94.5mm
± mm (Corresponding to 550 sheets)
Lower tray
Plain paper S size: Height 244mm
± mm (Corresponding to 1,700 sheets)
(Non-sort)
Plain paper L size: Height 94.5mm
± mm (Corresponding to 650 sheets)
* Lower tray only, when continuous non-sort operation of the same size of A4, B5, 8.5x11
Enable up to 347.1mm
± mm (corresponding to 2,450 sheets)
Staple
Plain paper S size: Height 225.4mm
± mm Plain paper L size: Height 94.5mm ± mm or S size max. 100 copies,
L size max. 5 copies
Staple section
Staple position
Staple position
One-point staple in the front (slant)
One-point staple at the back (slant)
Two-point staple
One-point staple at the back (slant)
Two-point staple
Size/weight of paper to be stapled
Refer to Table 1
Number of sheets to be stapled
(90g/m
(90g/m
2
)
50 sheets (A4, 8.5x11), in the mix staple mode: 30 sheets
Max.: 2 sheets of 256g/m
Max.: 2 sheets of 256g/m
2
paper+48 sheets of 90g/m
2
paper
As for the number of sheets to be stacked and limitations depending on the size, refer to Table 1.
Staple load system
Staple cartridge (5000 staples)
Staple empty detection
Available
Manual staple mode
Not available
Saddle stitch section
Stitch system
Stitch system
—
Center 2-position binding, bundle 2-folding
Folding position
—
Center folding (adjustment available)
Size/weight of paper allowed for saddle
stitching
stitching
—
Refer to Table 1.
Number of sheets to be stitched
—
Max: 15 sheets
(1sheet of 256 g/m
(1sheet of 256 g/m
2
+14 sheets of 80 g/m
2
)
Number of sets to be stacked
—
From 1 to 5 sheets: 25 sets
From 6 to 10 sheets: 20 sets
From 11 to 15 sheets: 10 sets
From 6 to 10 sheets: 20 sets
From 11 to 15 sheets: 10 sets
Staple load system
—
Staple cartridge (2000 pcs.)
Staple empty detection
—
Available
Paper empty detection
—
Available
Click on the first or last page to see other MX-FN19 / MX-FN20 / MX-PN12 service manuals if exist.