Read Sharp MX-FN17 / MX-PN11 (serv.man17) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-904
1. Model Name:
MX-FN17 (Options for MX2310U – MX2610N – MX3110N)
2. Description:
Implementation of ROM upgrades
From mid-April 2011 production
ROM control No.
Version
A03
010403
Item of change
1. Performing retry on the initial operation of the aligning motor up to 3 times will control the
occurrence of the "F1-19" error.
2. When performing staple processing and an aligning motor error is detected, a warning of a
batch ejection hold jam will be issued.
Note: Because of the ROM upgrade, the parts code of the control PWB has been changed.
However, the ROM upgrade for the control PWB before change is also supported,
therefore, replacing the control PWB is not required.
therefore, replacing the control PWB is not required.
3. Parts Action:
Ref.
No.
Model
name
Version P/G No.
Current parts
New parts
Price
rank
Q'ty
Parts name
Effective
time
Inter-
change-
ability
Parts code
Parts code
1
MX-FN17
ALL
9-59
0CW4188K25004
0CW4188K25005
CH
1
CONTROL PWB
2011/4
Mid
3
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
ROM UPGRADE ..... (4). Ver 01.04.03
TECHNICAL BULLETIN
Date:
27
th
May 2011
Model:
MX-FN17
Ref.:
001
Colour:
White
Page:
1 of 1
Display