MX-FN13. Service Manual. - Sharp Copying Equipment Service Manual (repair manual). Page 22

MX-FN13  DISASSEMBLY AND ASSEMBLY  8 – 6

6)

Disconnect the connector. Remove the screw, and remove the
paper alignment motor F.

1)

Disconnect the connector. Remove the screw, and remove the
paper alignment motor R.

1)

Remove the screw, remove the mounting plate, and discon-
nect the connector. Remove the paper alignment plate home
position F sensor from the mounting plate.

1)

Remove the screw, remove the mounting plate, and discon-
nect the connector. Remove the paper alignment plate home
position R sensor from the mounting plate.

1)

Remove the screw, and remove the sensor holder and the rear
edge regulation plate.

2)

Remove the screw, and remove the jogger F and the jogger R.

3)

Remove the screw, and remove the alignment tray upper unit.