Read Sharp MX-FN13 Service Manual online
MX-FN13 TROUBLE CODE 5 – 2
F1-19
Finisher paper alignment motor F
trouble
trouble
F1-20
Finisher paper alignment motor R
trouble
trouble
F1-37
Finisher RAM data trouble
F1-50
Finisher incompatible trouble
Phenomenon
Operation trouble of the paper alignment plate F
Case 1
Cause
Connection trouble or disconnection of the connector
and the harness of the motor
and the harness of the motor
Check &
Remedy
Remedy
Check the connection of the connector and the
harness in the motor line with the finisher control
PWB.
Connect the connector properly. Replace the
harness.
harness in the motor line with the finisher control
PWB.
Connect the connector properly. Replace the
harness.
Case 2
Cause
Paper alignment plate home position sensor F
(FAPHPS-F) trouble.
(FAPHPS-F) trouble.
Check &
Remedy
Remedy
Check to confirm that the FAPHPS-F turns ON/OFF
with SIM3-2.
If it does not turn ON/OFF, check the connection of
the connector and the harness of the sensor.
Replace the sensor.
with SIM3-2.
If it does not turn ON/OFF, check the connection of
the connector and the harness of the sensor.
Replace the sensor.
Case 3
Cause
Motor lock, an overcurrent to the motor, intrusion of
foreign material.
foreign material.
Check &
Remedy
Remedy
Select the FPAM-F with SIM3-3 to check the
operation of the single unit.
Check to confirm that there is no foreign material in
the drive section and the alignment plate.
operation of the single unit.
Check to confirm that there is no foreign material in
the drive section and the alignment plate.
Case 4
Cause
Finisher control PWB trouble. Motor trouble
Check &
Remedy
Remedy
Replace the finisher control PWB or the motor.
Phenomenon
Operation trouble of the paper alignment plate R
Case 1
Cause
Connection trouble or disconnection of the connector
and the harness of the motor
and the harness of the motor
Check &
Remedy
Remedy
Check the connection of the connector and the
harness in the motor line with the finisher control
PWB.
Connect the connector properly. Replace the
harness.
harness in the motor line with the finisher control
PWB.
Connect the connector properly. Replace the
harness.
Case 2
Cause
Paper alignment plate home position sensor R
(FAPHPS-R) trouble.
(FAPHPS-R) trouble.
Check &
Remedy
Remedy
Check to confirm that the FAPHPS-R turns ON/OFF
with SIM3-2.
If it does not turn ON/OFF, check the connection of
the connector and the harness of the sensor.
Replace the sensor.
with SIM3-2.
If it does not turn ON/OFF, check the connection of
the connector and the harness of the sensor.
Replace the sensor.
Case 3
Cause
Motor lock, an overcurrent to the motor, intrusion of
foreign material.
foreign material.
Check &
Remedy
Remedy
Select the FPAM-R with SIM3-3 to check the
operation of the single unit.
Check to confirm that there is no foreign material in
the drive section and the alignment plate.
operation of the single unit.
Check to confirm that there is no foreign material in
the drive section and the alignment plate.
Case 4
Cause
Finisher control PWB trouble. Motor trouble
Check &
Remedy
Remedy
Replace the finisher control PWB or the motor.
Phenomenon
Backup RAM operation trouble
Case 1
Cause
Finisher control PWB trouble. EEPROM trouble.
Check &
Remedy
Remedy
Replace the finisher control PWB or the EEPROM.
Phenomenon
Connection of a finisher incompatible with the
machine is detected.
machine is detected.
Case 1
Cause
Connection of a finisher incompatible with the
machine is detected.
machine is detected.
Check &
Remedy
Remedy
Connect the MX-FN13 to the machine.
Click on the first or last page to see other MX-FN13 service manuals if exist.