Read Sharp MX-FN12 Service Manual online
MX-FN12 SIGNAL LIST 8 – 2
FPTM
Finisher paper transport motor
Transports paper discharged from
the main unit.
the main unit.
–
–
CND
5-10
FPTMA
Finisher paper transport motor
control signal (phase A)
control signal (phase A)
Controls the transport motor
(phase A).
(phase A).
–
–
CND
5
FPTM/A
Finisher paper transport motor
control signal (phase /A)
control signal (phase /A)
Controls the transport motor
(phase /A).
(phase /A).
–
–
CND
6
FPTMB
Finisher paper transport motor
control signal (phase B)
control signal (phase B)
Controls the transport motor
(phase B).
(phase B).
–
–
CND
7
FPTM/B
Finisher paper transport motor
control signal (phase /B)
control signal (phase /B)
Controls the transport motor
(phase /B).
(phase /B).
–
–
CND
8
FSCF
Finisher stapler cooling fan
Blows air from the front side to cool.
OFF
ON
CNE
16
FSED
Finisher staple empty detector
Detects empty of spare staples in
the stapler.
the stapler.
Staple
present
Staple empty
CNE
30
FSHPS
Finisher staple home position
sensor
sensor
Detects the standby position of the
stapler.
stapler.
HP
Other than HP
CNE
28
FSLD
Finisher staple lead detector
Detects the staple position of the
stapler.
stapler.
Ready
Other than
Ready
CNE
29
FSM
Finisher staple motor
Stapling operation of paper bundle
–
–
CNE
23-26
FSM+
Finisher staple motor control
signal (+ side)
signal (+ side)
Controls the staple motor (+ side).
–
–
CNE
23, 24
FSM-
Finisher staple motor control
signal (- side)
signal (- side)
Controls the staple motor (- side).
–
–
CNE
25, 26
FSSW
Finisher safety switch
Turns OFF the power when the front
door is opened to stop the motor.
door is opened to stop the motor.
–
–
CNF
1-2
FSTPD
Finisher staple tray paper
detector
detector
Detects paper empty on the
compiler tray.
compiler tray.
Paper
empty
empty
Paper present
CNG
10
FTLM
Finisher tray lift motor
Up/down operation of the paper
delivery tray
delivery tray
–
–
CNC
7-8
FTLM+
Finisher tray lift motor control
signal (+)
signal (+)
Controls the tray lift motor (+ side).
–
–
CNC
7
FTLM-
Finisher tray lift motor control
signal (-)
signal (-)
Controls the tray lift motor (- side).
–
–
CNC
8
Signal
name
Name
Function/Operation
Connector level
Connector
No.
Pin
No.
No.
NOTE
"L"
"H"
Click on the first or last page to see other MX-FN12 service manuals if exist.