Read Sharp MX-FN12 Service Manual online
MX-FN12 DISASSEMBLY AND ASSEMBLY 6 – 9
(5) ST tray
1)
Remove the spring, the screw, and the jogger. Remove the
screw, and remove the ST tray rear edge plate.
screw, and remove the ST tray rear edge plate.
2)
Remove the screw, and remove the ST tray.
(6) Staple tray paper detector
1)
Disconnect the connector, and remove the staple tray paper
detector.
detector.
(7) Paper rear edge detector F/C/R
1)
Remove the screw, and remove the holder and disconnect the
connector. Remove the paper rear edge detector from the
holder.
connector. Remove the paper rear edge detector from the
holder.
NOTE: The actuator differs depending on the detector F, C, and R.
Click on the first or last page to see other MX-FN12 service manuals if exist.