Read Sharp MX-EB13 Service Manual online
1
1. Unpacking
A. Confirmation of items packed (MX-EB13)
No. Parts
name Qty
1
USB wireless LAN adopter
1
2 Operation
manual
1
3 Warning
sticker
1
2. Installation
Before installation, turn the operation panel and
main power switches on the main machine OFF and unplug the
power cord.
1) Connect the USB wireless LAN adopter to the USB
terminal on the main machine.
Always connect it to the USB terminal on the side or the rear
side of the main unit. Never connect it to the terminal at the
front of the operation panel.
2) Reboot the machine.
After connected from the wired LAN to wireless LAN and vice
versa, always reboot the main machine.
3. System Setting Change
A. Simulation setting change
1. Enter SIM26-50.
2. Change the “WIRELESS SET” setting value from “0(NO)” to
“1(YES)”.
B. Setting change
1) Connection type change
1.Go into the following setting menu mode.
Home→Settings→Administrator Login→
Network Settings→Wireless Settings
2. Set the Network settings to the Wireless.
Name of
setting
Setting Available
I/F
Connection
Type
Switching
Type
Switching
Wired Only(default)
Wireless LAN: Disable
Wired LAN: Enable
Wired LAN: Enable
Wireless
(Infrastructure Mode)
(Infrastructure Mode)
Wireless LAN:
Enable (operable as
a cordless handset)
Wired LAN: Disable
Enable (operable as
a cordless handset)
Wired LAN: Disable
Wired + Wireless
(Ad-hoc Mode)
(Ad-hoc Mode)
Wireless LAN:
Enable (operable as
a cordless handset)
Wired LAN: Enable
Enable (operable as
a cordless handset)
Wired LAN: Enable
3. Press [Submit] key.
4. Press [Reboot Now] key. The following message appears.
Now turning off the power.
2) Access point registration
Go into the following setting menu mode.
Home→Settings→Administrator Login→
Network Settings→Wireless Settings
1. Press [Setup] key.
1
Click on the first or last page to see other MX-EB13 service manuals if exist.