Read Sharp MX-EB13 (serv.man2) User Guide / Operation Manual online
Wireless LAN Operational Procedure (for Overseas)
9
June 29. 2012
3.2. Detailed Settings for Wireless LAN
■
How to Open Settings Screen
I.
Follow the procedure described in 3.1.I to open the System Settings screen -> the Network Settings screen. In
the Network Settings screen, click the [Wireless Settings] key.
the Network Settings screen, click the [Wireless Settings] key.
Operational Procedure for MX-2310F Series
II.
Follow the procedure described in 3.1.II to open the Wireless Settings screen.
Operational Procedure for MX-2610FN Series
3.2.1.
Viewing Current Wireless Settings
The Wireless Settings screen shows the current settings.
Category
Category
Item
Description
Infrastructure Mode
Infrastructure Mode
Ad-hoc Mode
Current settings
Mode
This shows whether the MFP is in Infrastructure Mode or
Ad-hoc Mode.
Ad-hoc Mode.
Channel to be used
This shows, only when the MFP is in Ad-hoc Mode, the wireless
LAN channel that is used currently.
LAN channel that is used currently.
Name of network (SSID) This shows the SSID that is set currently.
Security type
Security type
This shows the security type that is set currently.
Security key
This shows the security key when it is set.
The security key is represented with asterisks.
The security key is represented with asterisks.
MFP’s MAC address
This shows the MAC address of the wireless LAN adaptor.
Current wireless
conditions
conditions
IP address status
This shows the IP address of
the MFP.
This shows the IP address of
the MFP for Ad-hoc Mode.
(The above IP address is
different from the IP address
for a wired LAN when such is
also used.)
the MFP for Ad-hoc Mode.
(The above IP address is
different from the IP address
for a wired LAN when such is
also used.)
Reception level
This shows the electric wave
reception level in the range of
0 to 100.
reception level in the range of
0 to 100.
This is not shown in Ad-hoc
Mode.
Mode.
Number of Connected
(Number of currently
connected client devices)
(Number of currently
connected client devices)
This is not shown in
Infrastructure Mode.
Infrastructure Mode.
This shows the number of
client devices that are
currently being connected to
the MFP in Ad-hoc Mode.
client devices that are
currently being connected to
the MFP in Ad-hoc Mode.
Connected client device
This is not shown in
Infrastructure Mode.
Infrastructure Mode.
This shows the IP addresses
and MAC addresses of the
client devices that are
currently being connected to
the MFP in Ad-hoc Mode. To
release a client device from
the ad-hoc connection, click a
radio button next to the
and MAC addresses of the
client devices that are
currently being connected to
the MFP in Ad-hoc Mode. To
release a client device from
the ad-hoc connection, click a
radio button next to the
Click on the first or last page to see other MX-EB13 (serv.man2) service manuals if exist.