Read Sharp MX-EB13 (serv.man10) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
1/3
Date:
5
th
December 2014
Model:
MX-EB13
Ref.:
CCE1403
Colour:
White
Page:
1 of 3
TECHNICAL BULLETIN
SUPPORT FOR REVISION OF WIRELESS
STANDARDS IN EUROPE
STANDARDS IN EUROPE
1. Model Name:
MX-EB13 only for Europe/Australia
(Option for MX-2310U/3111U, MX-2610N/3110N/3610N, MX-2314N/2614N/3114N,
MX-4112N/5112N, MX-M364N/M464N/M564N, MX-M264N/M314N/M354N,
MX-M264NR/M314NR/M354NR/M264NV)
2. Description:
Concerning USB wireless LAN adaptor (MX-EB13), the specification has been changed
to support Wireless Standards in Europe (ETSI R&TTE EN 300 328 V1.8.1) that is
revised.
(Only
for
Europe/Australia)
Since the output of the radio wave has been reduced than the conventional adaptor to
support the new standards, the normal operating range becomes narrow.
The distance between the master and slave units which stably can communicate has
been narrowed to approx. 20 metres while it was approx. 30 metres with the conventional
adaptor.
(The actual communication distance is influenced by the extraneous factors such as the
obstruction and radio wave environment etc.)
The guideline of the distance between MFP with MX-EB13 installed and the wireless
access point (or ad-hoc terminal) is within 20 metres though it depends on the
environment of
usage.
Note) The radio field intensity displayed on MFP (indicated in red in Fig. below) is the
radio field intensity (Reception Level) of the access point and even if the equivalent
level of radio field intensity (Reception Level) to the conventional adaptor is
displayed when connecting the new device, the connection may be bad compared
with the conventional wireless LAN adaptor as the transmission output becomes
weak.
Sharp Electronics (UK) Ltd., Document Systems Support
2/3
3. Action:
From November 2014 production (only for Europe/Australia)
- Identification of old/new
USB wireless LAN adaptor
Before change
After change
Mode: Infrastructure Mode
Status: Connecting
SSID: MX-EB13-TEST
Security Type: None
MAC Address: **-**-**-**-**-**
IP Address: 192.168.0.5
Reception Level (Max. 100): 54
Sharp Electronics (UK) Ltd., Document Systems Support
3/3
Changes of individual packing box:
(1) Russian inscription has been added.
(2) EAN code has been changed from the label to the print.
(3) PAP mark has been changed from the stamp to the print on the back side of the box.
Before change
After change
Changes of outer carton box:
(1) Russian inscription has been added.
(2) EAN code has been changed from the label to the print.
(3) The position of PAP mark has been changed and also changed from the stamp
to the print.
Before
change
After
change
(1)
(2)
(3)
(2)
(3)
(1)
(1)