Read Sharp MX-CFX2 Service Manual online
MX-CFX2 MAINTENANCE LIST 2 – 1
MX-CFX2
Service Manual
[2] MAINTENANCE LIST
✕: Check {: Clean S: Replace U: Adjust ✩ : Lubricate : Shift position
(Clean, replace, or adjust as needed.)
(Clean, replace, or adjust as needed.)
NOTE: Replacement reference: Replace according to each paper feed counter value.
• Roller (MX-CFX2) : 60K or 1 year
Torque limiter : 800K
* Paper feed section roller life
The life of roller used in paper feed section of each option is
different. (See the table below.) When a certain paper feed unit
is used greater than usual, its life may be expired before the
maintenance timing.
Actually, however, different sizes of paper are used with differ-
ent paper feed trays, and it is quite rare that the roller replace-
ment must be made before the maintenance timing.
IF a certain paper size is used more than normal, set feed
trays for that paper size and explain the frequency of mainte-
nance to the client.
When servicing, check the use frequency of each paper feed
tray, and replace the rollers as needed.
When cleaning the roller, it is advisable to use a wet cloth with
a small quantity of water.
The amount of friction applied to the rollers increases from pick
up to paper feed to paper separation.
different. (See the table below.) When a certain paper feed unit
is used greater than usual, its life may be expired before the
maintenance timing.
Actually, however, different sizes of paper are used with differ-
ent paper feed trays, and it is quite rare that the roller replace-
ment must be made before the maintenance timing.
IF a certain paper size is used more than normal, set feed
trays for that paper size and explain the frequency of mainte-
nance to the client.
When servicing, check the use frequency of each paper feed
tray, and replace the rollers as needed.
When cleaning the roller, it is advisable to use a wet cloth with
a small quantity of water.
The amount of friction applied to the rollers increases from pick
up to paper feed to paper separation.
[Roller life of each paper feed section]
No.
Part name
When
calling
500K
1000K
1500K
2000K
2500K
3000K
Life judgement (Reference)
Tool, oil, chemicals
Procedure
Treatment after procedure
1
Drive roller
✕
{
{
{
{
{
{
When there is dirt, wipe with
wet cloth and water.
wet cloth and water.
2
Follower roller
✕
{
{
{
{
{
{
When there is dirt, wipe with
wet cloth and water.
wet cloth and water.
3
Paper feed belt
✕
✕
✕
✕
✕
✕
✕
Roller life 60K
* Refer to the NOTE:
* Refer to the NOTE:
Specified with the use ratio
of 10%.
of 10%.
4
Reverse roller
✕
✕
✕
✕
✕
✕
✕
Roller life 60K
* Refer to the NOTE:
* Refer to the NOTE:
Specified with the use ratio
of 10%.
of 10%.
5
Pick-up roller
✕
✕
✕
✕
✕
✕
✕
Roller life 60K
* Refer to the NOTE:
* Refer to the NOTE:
Specified with the use ratio
of 10%.
of 10%.
6
Sensor
✕
{
{
{
{
{
{
7
Paper feed drive gear
✕
✕
✕
✕
✕
✕
✕
UKOG-0307FCZZ
8
Punch hole horizontal
resist adjustment
resist adjustment
✕
✕
✕
✕
✕
✕
✕
9
Transport guide plate
✕
{
{
{
{
{
{
10
Torque limiter
✕
✕
✕
✕
✕
✕
✕
Model name
Life
MX-LCX6
200K
MX-LCX3 N
100K
MX-MFX1
100K
MX-LCX4 (Paper feed tray 1, 2, 3)
200K
MX-LCX5 (Paper feed tray 1, 2, 3)
200K
MX-MFX2
200K
MX-CFX2
60K
Click on the first or last page to see other MX-CFX2 service manuals if exist.