MX-C310, MX-C311, MX-C312, MX-C380, MX-C381, MX-C400, MX-C401 (serv.man124). Installation Manual - Sharp Copying Equipment Service Manual (repair manual). Page 53

MX-C401  MX-NSX1 (NETWORK SCANNER KIT)  14 – 1

MX-C401

Service Manual

 

<Note before installation>
• To enable the network scanner function, the product key must be

acquired.

• For the models in which the printer and the network function can-

not be used, the expansion memory board must be installed in
advance. (Refer to the Operation Manual attached to the
machine and the Service Manual.)

1)

To enable the network scanner function, enter the product key
by the key operation of the operation panel.
a) Touch [Product Key].
b) Enter the product key with the 10-key, and touch [Enter] key.

2)

After completion of the product key entry, turn OFF the power
switch and the main power switch of the machine, and turn
them ON again.

1)

Perform Scan to Desktop to check the operation of the network
scanner function.

2)

Use the included CD-ROM (package part No. 1) to install the
software program of "Sharpdesk/Network Scanner Tool."
For the installing procedures, refer to the installation guide
(pakage part No. 3) included in the package. (For details, refer
to the installation guide in the included CD-ROM.)
* Installation and setup of the software program to the PC

must be performed by the user or by the serviceman under
consultation with the user.

3)

Set the destination profile by referring to the contents of the
Network Scanner Tool User’s Guide in the included CD-ROM,
and send image data. Check that the image data are properly
received.

1

CD-ROM

2

2

Product key sheet

1

3

Installation guide

1