MX-C310, MX-C311, MX-C312, MX-C380, MX-C381, MX-C400, MX-C401 (serv.man12). Revised Service Manual. - Sharp Copying Equipment Service Manual (repair manual). Page 14

Read Sharp MX-C310 / MX-C311 / MX-C312 / MX-C380 / MX-C381 / MX-C400 / MX-C401 (serv.man12) Service Manual online

MX-C401 CONSUMABLE PARTS 2 – 7
*1: Selection of Display/Not Display can be made with Sim26-69. (Default: Not Display)
*2: When the black drum cartridge does not reach the life end and only the color drum cartridge reaches the life end, black/white print can be 
performed but color print cannot be performed.
• When the developer cartridge is replaced with a new one, the print counter, the accumulated traveling distance counter, the accumulated
rotation number counter, and the usage day counter are automatically cleared, and the guidance for execution of the auto color calibration is
displayed.
• If the above guidance does not disappear when the developer cartridge is replaced, the initial setting of the toner density must be executed
with the simulation, and the auto color calibration must be executed.
• When the initial setting of the toner density is executed, the counters are cleared and the above display disappears.
C. Toner cartridge
For 
 
 
 
, only the life end cartridge code is displayed.
*1: Detected by the toner motor rotation number and the pixel count (The value of larger life percentage is employed.)
Since the life of the toner cartridge which is packed when shipping from the factory is 2.5K, the remaining quantity of the toner cartridge, 
though it is a new one,  is displayed as 25-0%.
*2: Selection of Display/Not Display can be made with Sim26-69. (Default: Not Display)
*3: Setting can be made with Sim26-69. (Default: 0 sheet)
*4: When the black toner cartridge does not reach the life end and only the color toner cartridge reaches the life end, black/white print can be 
performed but color print cannot be performed.
(Change the supplies. 
Photoconductive Drum 
Cartridge   )
1 (Print stop)
Developer cartridge print counter (C)
Developer cartridge print counter (M)
Developer cartridge print counter (Y)
When 30K is reached
Enable for Black/White
Disable for Color
*2
Developer cartridge accumulated rotation number (C)
Developer cartridge accumulated rotation number (M)
Developer cartridge accumulated rotation number (Y)
When 550K rotations is reached
Enable for Black/White
Disable for Color
*2
Display content
Display condition
Print job
Enable/Disable
Sim26-38-A
set value
Remaining 
quantity display *1
Status
(
    
Toner 
supply 
is 
low.) 
*2
0 (Print continue)
25-0%
Toner remaining quantity is 25% or less.
Enable
1 (Print stop)
(The supplies will be needed soon. 
Toner 
Cartridge    ) 
*2
0 (Print continue)
25-0%
Toner remaining quantity corresponds to output of 
XX sheets. *3
Enable
1 (Print stop)
[Change the toner cartridge. 
]
0 (Print continue)
25-0%
When the black toner cartridge reaches toner end.
Disable
1 (Print stop)
(Change the supplies. Toner 
Cartridge   )
0 (Display)
25-0%
When the color toner cartridge reaches toner end.
Enable for Black/White
Disable for Color
*4
1 (No display)
No display
—
50-25%
Toner remaining quantity is 49 - 25%.
Enable
No display
—
75-50%
Toner remaining quantity is 74 - 50%.
Enable
No display
—
100-75%
Toner remaining quantity is 100-75%.
Enable
Install the toner cartridge.
—
No display
When no toner cartridges are installed.
When a toner cartridge of a different color is installed.
Disable
Improper cartridge.
—
No display
When an incompatible toner cartridge is installed.
Disable
Cartridge error.
—
No display
CRUM trouble
Toner cartridge connector contact trouble
Disable
Display content
Display condition
Print job
Enable/Disable
Sim26-38-E
set value
Counter name
Counter value
C M Y
K C Y M
K C M Y
K C M Y
K
C M Y

Display

Click on the first or last page to see other MX-C310 / MX-C311 / MX-C312 / MX-C380 / MX-C381 / MX-C400 / MX-C401 (serv.man12) service manuals if exist.

Random: