Read Sharp MX-C301 / MX-C301W (serv.man38) Technical Bulletin online
2/3
Mounting instruction of fusing separate plate earth spring and washer (rear side of the fusing unit)
Mount the washer and screw
*Tighten the screw halfway.
*Hook the loop-shaped hook to the grip
(loop-shaped section) of separate plate
spring (R side).
(See the photo of the hooking direction).
*Hook the other side to the screw section that is
tightened halfway.
(See the photo of the hooking direction).
*Fasten the screw with the fusing
separate earth spring being hooked.
3. Fasten the screw. *Conduct the work while holding the spring tight to fix the hook section of the spring with the screw head.
2. Mount the fusing separate plate earth spring. *Pay attention to the hooking direction (Loop-shaped side).
1. Tighten M3x12 P-tight screw to the fusing upper frame halfway. (Leave the clearance to hook the spring.)
*In the order of Resin=> Washer=>
Fusing separate plate earth spring => Screw.
Finished picture
Click on the first or last page to see other MX-C301 / MX-C301W (serv.man38) service manuals if exist.