Read Sharp MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man7) Service Manual online
MX-C250F/C250FE
MX-C250FR
MX-C300F/C300W
MX-C300WR
MULTIFUNCTIONAL SYSTEM
satisfied.
exhibit full performance, resulting in problems. It may also cause
safety problems. Using the following information, make sure all
aspects of installation, space, power, transportation, leveling, and
safety are met.
size is wide enough before bringing in.
assure machine performance and proper operations.
tion.
lation of heat and dust. The machine will not function properly if heat
and dust cannot be properly expelled from the machine.
safety, plug)
full with performance and may cause safety trouble.
provide a proper power source.
power outlet of the acceptable shape.
range of the specified voltage +/- 10%.
electrician upgrade the outlet.
ity must be great enough for the max. power consumption of the
machine.
2%. If the power waveform is improper, a problem may occur with the
machine.
power plug into the power outlet.
power plug from the power outlet in advance.
power outlet of the acceptable shape.
Power plug stated in power capacity.
option installed.
machine as well as any installed options.
degrading the copy / print quality.
To assure proper Image quality, make sure the machine is sitting level.
ity, gasses, chemicals, vibration
perature and humidity. If the temperature and humidity exceeds the
specified range, the machine may not operate properly and or cause
equipment failure.
cause a paper jam or dirty copy.
humidifier.
chemicals
(30cm)
(30cm)
(45cm)
lems. Make sure machine has proper ventilation.
resulting in a shortened lifetime.
may be discolored and abnormal copies may be produced.
icals. Especially be careful to avoid installation near a diazo-type
copier, which produces ammonium gas.
arise.
deflected and a trouble may be caused.
the following precautions in order to prevent against damage by static
electricity.
anti-static case and do not touch them with bare hands.
use an earth band as shown below:
cedure on an anti-static mat.
transfer unit handling
units, observe the following items.
unit in high intensity light areas.
light blocking material. (When using paper, use about 10 sheets of
paper to cover it.)
material on the OPC drum surface.
material on the transfer roller, primary transfer belt and secondary
transfer roller.
material on the developing unit.
material on the fusing roller.
release the pressure on the fusing rollers.
and print image quality.
machine is considerably heavy, and requires safety precautions for
delivery and installation.
ing place.
ment.
ity, and man power
manpower of two persons is required.)
tion.