Read Sharp MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man15) User Guide / Operation Manual online
MX-C250 MX-CS11 (500 SHEET PAPER FEED UNIT) 3 – 2
4) Remove the Rear cover. .
5) Attach the main unit and MX-CS11 with the plates (Packed item
Plate B) and the screws (Packed items M4x10 P Tight).
C.Turn on the power of the main unit
1) Power to the main unit.
2)
2)
Turn ON the power switch.
3. Adjustments
A.Image off-center automatic adjustment (Docu-
ment table mode)
ment table mode)
1) Enter the SIM50-10 mode.
2) Set A4 (11" x 8.5") paper in each paper feed tray.
3) Press [START] key.
The adjustment pattern is printed out. (Paper is fed from the
paper feed tray.)
paper feed tray.)
Perform the procedures of 2) - 3) for the printed adjustment pat-
tern of each paper feed tray.
tern of each paper feed tray.
4) Press [OK] key.
The adjustment result becomes valid.
B.Copy image position, image loss, and void area
adjustment (Manual adjustment)
adjustment (Manual adjustment)
1) Place a scale on the document table as shown in the figure
below.
Place a scale so that it is in parallel with the scanning direction
and that its lead edge is in contact with the document guide
plate.
and that its lead edge is in contact with the document guide
plate.
Place white paper on the document table so that the scale lead
edge can be seen.
edge can be seen.
2) Enter the SIM 50-1 mode.
3) Set RRCA, LEAD, and SIDE to the default values.
B
D
D
B
D
D
Sim50-10 PAPER OFFSET
1䠖 BK-MAG
100
㻌
2䠖 MAIN-MFT
3䠖 MAIN-CS1
1 / 3 [ 60/ 140] 㻌 㻌
3䠖 MAIN-CS1
1 / 3 [ 60/ 140] 㻌 㻌
100
50
50
50
EXEC
Sim50-10 PAPER OFFSET
1䠖 BK-MAG
100
㻌
2䠖 MAIN-MFT
3䠖 MAIN-CS1
1 / 3 [ 60/ 140] 㻌 㻌
3䠖 MAIN-CS1
1 / 3 [ 60/ 140] 㻌 㻌
100
50
50
50
EXEC
Item/Display
Content
Set-
ting
ting
range
Defau
lt
value
1
Lead
edge
adjust-
ment
value
edge
adjust-
ment
value
RRCA
Document lead
edge reference
position (OC)
edge reference
position (OC)
0 - 99
50
2
RRCB-
CS1
CS1
Regis
-tra-
tion
motor
ON
tim-
ing
adjus
t-
ment
-tra-
tion
motor
ON
tim-
ing
adjus
t-
ment
Standard
Tray
Tray
1 - 99
40
3
RRCB-
DSK
DSK
Desk
1 - 99
50
4
RRCB-
MFT
MFT
Manual
paper
feed
paper
feed
1 - 99
50
5
RRCB-
ADU
ADU
ADU
1 - 99
50
Sim50-01 LEAD EDGE ADJ
1䠖 RRCA
50
㻌
2䠖 RRCB-CS1
3䠖 RRCB-DSK
1 / 6 [ 1/ 99] 㻌 㻌
3䠖 RRCB-DSK
1 / 6 [ 1/ 99] 㻌 㻌
50
Sim50-01 LEAD EDGE ADJ
1䠖 RRCA
2䠖 RRCB-CS1
3䠖 RRCB-DSK
1 / 6 [ 1/ 99] 㻌 㻌
2䠖 RRCB-CS1
3䠖 RRCB-DSK
1 / 6 [ 1/ 99] 㻌 㻌
50
50
51
50
50
51
1
‘13/Oct
1
1
1
Click on the first or last page to see other MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man15) service manuals if exist.