Read Sharp MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man14) User Guide / Operation Manual online
19
BEFORE USING THE MACHINE
LOADING PAPER
Make sure that the machine is not copying or printing, and then follow these steps to load paper.
Loading the paper tray
1
Gently lift and pull out the paper tray until it stops.
2
Push the pressure plate down, and adjust the plates in the tray to the length and width
of the paper.
of the paper.
(1) Push the centre of the pressure plate down until it locks into place.
(2) The plate A and B are slide-type guides. Grasp the locking knob on the
(2) The plate A and B are slide-type guides. Grasp the locking knob on the
guide and slide the guide to the indicator line of the paper to be loaded.
3
Load paper into the tray.
• Open the package of the paper and load it without fanning the paper.
• Make sure the stack of paper is straight before loading it.
• Make sure the stack of paper is straight before loading it.
4
Gently push the paper tray into the machine.
Push the tray in completely.
• Do not load paper higher than the line on the tray (up to 250 sheets).
• Do not add paper to the loaded paper. It may cause multiple feed of
• Do not add paper to the loaded paper. It may cause multiple feed of
paper.
• If you loaded a different size of paper than was loaded previously in
the tray, go to "CHANGING THE PAPER SIZE SETTING OF A TRAY"
(p.22).
(p.22).
• When misfeed occurs, rotate the paper 180 degrees and reload it.
• Straighten curled paper before using it.
• Straighten curled paper before using it.
(1)
(2)
(2)
(2)
Plate B
Plate A
Note
Roller
Line on
the tray
the tray
Note
Click on the first or last page to see other MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man14) service manuals if exist.