MX-C250, MX-C250E, MX-C250F, MX-C250FE, MX-C250FR, MX-C300F, MX-C300W, MX-C300WE, MX-C300A, MX-C300WR (serv.man12). Start Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 3

Read Sharp MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man12) User Guide / Operation Manual online

3
English
CAUTIONS
To ensure safe use of the machine, this manual uses various safety symbols. 
The safety symbols are classified as explained below. Be sure you understand 
the meaning of the symbols when reading the manual.
 WARNING
Indicates a risk of death or serious injury.
 CAUTION
Indicates a risk of human injury or property damage.
 When removing the power plug from the outlet, do not pull on the cord.
Pulling on the cord may cause damage such as wire exposure and 
breakage, and may result in fire or electrical shock.
If you will not use the machine for a long time, be sure to 
remove the power plug from the outlet for safety.
When moving the machine, switch off the main power and 
remove the power plug from the outlet before moving.
The cord may be damaged, creating a risk of fire or electrical shock.
Power notes
 WARNING
Be sure to connect the power cord only to a power outlet that meets 
the specified voltage and current requirements. Also make certain the 
outlet is properly grounded. Do not use an extension cord or adapter 
to connect other devices to the power outlet used by the machine. 
Using an improper power supply may cause fire or electrical shock.
*  For the power supply requirements, see the name plate in the lower 
left corner of the left side of the machine.
Do not damage or modify the power cord.
Placing heavy objects on the power cord, pulling it, or forcibly 
bending it will damage the cord, resulting in fire or electrical shock.
Do not insert or remove the power plug with wet hands.
This may cause electrical shock.
Meaning of the symbols
CAUTION!
HOT
PINCH POINT
KEEP CLEAR
PROHIBITED 
ACTIONS
DO NOT
DISASSEMBLE
MANDATORY 
ACTIONS
 CAUTION
Symbols in this manual
Do not install the machine on an unstable or slanted surface. Install the 
machine on a surface that can withstand the weight of the machine.
Risk of injury due to the machine falling or toppling.
If peripheral devices are to be installed, do not install on an uneven floor, slanted 
surface, or otherwise unstable surface. Danger of slippage, falling, and toppling. Install 
the product on a flat, stable surface that can withstand the weight of the product.
Do not install in a location with moisture or dust.
Risk of fire and electrical shock.
If dust enters the machine, dirty output and machine failure may result.
Locations that are excessively hot, cold, humid, or dry (near 
heaters, humidifiers, air conditioners, etc.)
The paper will become damp and condensation may form inside the 
machine, causing misfeeds and dirty output.
If the location has an ultrasonic humidifier, use pure water for humidifiers in the 
humidifier. If tap water is used, minerals and other impurities will be emitted, 
causing impurities to collect on the inside of the machine and create dirty output.
Locations exposed to direct sunlight
Plastic parts may become deformed and dirty output may result.
Locations with ammonia gas
Installing the machine next to a diazo copy machine may cause dirty output.
Do not install the machine in a location with poor air circulation.
A small amount of ozone is created inside the machine during printing. 
The amount of ozone created is not sufficient to be harmful; however, an 
unpleasant odor may be noticed during large copy runs, and thus the machine 
should be installed in a room with a ventilation fan or windows that provide 
sufficient air circulation. (The odor may occasionally cause headaches.)
*  Install the machine so that people are not directly exposed to exhaust from the machine. 
If installed near a window, ensure that the machine is not exposed to direct sunlight.
Near a wall
Be sure to allow the required space 
around the machine for servicing 
and proper ventilation. (The machine 
should be no closer than the 
distances indicated below from walls. 
The indicated distances are for the 
case when a saddle finisher and large 
capacity paper tray are not installed.)
30 cm
30 cm
45 cm
Locations subject to vibration.
Vibration may cause failure.
Installation notes
 CAUTION
 CAUTION
•  The machine should be installed near an accessible power outlet for 
easy connection.
•  Connect the machine to a power outlet which is not used for other electric 
appliances. If a lighting fixture is connected to the same outlet, the light may flicker.
Do not throw a toner cartridge into a fire.
Toner may fly and cause burns.
Store a toner cartridge out of the reach of children.
About consumables
 CAUTION
Do not place a container of water or other liquid, or a metal 
object that might fall inside, on the machine.
If the liquid spills or the object falls into the machine, fire or electrical shock may result.
Do not remove the machine casing.
High-voltage parts inside the machine may cause electrical shock.
Do not make any modifications to this machine.
Doing so may result in personal injury or damage to the machine.
Do not use a flammable spray to clean the machine.
If gas from the spray comes in contact with hot electrical components 
or the fusing unit inside the machine, fire or electrical shock may result.
If you notice smoke, a strange odor, or other abnormality, do 
not use the machine.
If used in this condition, fire or electrical shock may result.
Immediately switch off the main power and remove the power plug from the power outlet.
Contact your dealer or nearest authorised service representative.
If a thunder storm begins, switch off the main power and remove the power 
plug from the outlet to prevent electrical shock and fire due to lightning.
If a piece of metal or water enters the machine, switch off the 
main power and remove the power plug from the power outlet.
Contact your dealer or nearest authorised service representative. Using 
the machine in this condition may result in electrical shock or fire.
Handling precautions
 WARNING
 CAUTION
Do not look directly at the light source.
Doing so may damage your eyes.
Do not block the ventilation ports on the machine. Do not install 
the machine in a location that will block the ventilation ports.
Blocking the ventilation ports will cause heat to build up in the 
machine, creating a risk of fire.
The fusing unit and paper exit area are hot. When removing a misfeed, do 
not touch the fusing unit and paper exit area. Take care not to burn yourself.
When loading paper, removing a misfeed, performing 
maintenance, closing the front and side covers, and inserting 
and removing trays, take care that your fingers are not pinched.
Wave length
790 nm ± 10 nm
Pulse times
(9.97 µs ± 0.034 ns) / 7 mm
Output power Max 0.6 mW
Caution
Use of controls or adjustments or performance of procedures other than those 
specified herein may result in hazardous radiation exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 2-2007).
Laser information
Page of 8
Display

Click on the first or last page to see other MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man12) service manuals if exist.