Read Sharp MX-BMX1 (serv.man9) User Guide / Operation Manual online
7
59
Open the top cover.
Put a couple of drops of oil in each clincher (A).
To get rid of excessive oil:
Push down clincher (B) lever a couple of times.
Push down clincher lever (B) while wiping of excessive oil with a dry cloth.
Run a few blank booklets.
When clinchers have beed lubricated, the error message must be reset:
Switch of the main power switch on the machine.
Press and hold the two innermost buttons on the UI, buttons 2 and 3.
Switch on the main power switch and release the buttons after 2 seconds.
Remove the Stapler heads according to section 1, BASICS Check staples, Staple cartridge
and Stapler head.
Put a couple of drops of oil on each side of the drive post (C).
Cycle the Stapler head a couple of times before installing it again.
The stapler heads must be oiled every 20 000 stapling cycles to avoid mechanical
breakdown.
C
Click on the first or last page to see other MX-BMX1 (serv.man9) service manuals if exist.