Read Sharp MX-BMX1 (serv.man9) User Guide / Operation Manual online
Note
The indications like front and rear, left and right refer to the paper transport direction.
The operator manual always has to be available at the place of use of the machine.
In the interest of technical development the company reserves the right to make alterations to
specifications without prior notice!
•
•
•
CAUTION:
The machine and its peripherals must be installed and maintained by a customer service repre-
sentative who has completed the training course on those models.
Allways follow all warnings marked on, or supplied with, the equipment.
When you disconnect the power plug from the wall outlet, allways pull the plug (not the cable).
Disconnect the power cord before you move the machine. While moving the machine, allways
exercise care and make sure that the power cord will not be damaged under the machine.
Allways contact service if relocating the equipment.
Do not move the machine while the machine is running.
Do not open covers while the machine is running.
Do not switch of the power while the machine is running. Make sure the machine cycle has
ended.
Lay the power cord in a way that nobody will stumble over it. Do not place things on the cord.
Never attempt any maintenace function that is not specifically described in this documentation.
Always keep magnets and all devices with strong magnetic fields away from the machine.
If the place of installation is air-conditioned or heated, do not place the the machine where it
will be:
Subject to sudden temperature changes.
Directly exposed to cool air from an air-conditioner.
Directly exposed to heat from a heater.
If the machine is not used over an extended period of time it should be unplugged to prevent
damage in the case of overload.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
General safety, continued
Click on the first or last page to see other MX-BMX1 (serv.man9) service manuals if exist.