Read Sharp MX-BMX1 (serv.man2) Service Manual online
TR-3-10
20 October 2010
COVERS
3.1.10 INTERLOCK MECHANISM
Removal
1. Remove screws [A] ( x 2).
2. Remove interlock mechanism bracket [B].
1. Remove screws [A] ( x 2).
2. Remove interlock mechanism bracket [B].
Replacement
1. Reverse the removal procedure.
1. Reverse the removal procedure.
Adjustment
1. Make sure interlock box is mounted correctly (
1. Make sure interlock box is mounted correctly (
3.1.7).
2. Loosen nuts [A] ( x2).
3. Adjust the interlock mechanism [B] so that it is parallel to the Top cover and so
3. Adjust the interlock mechanism [B] so that it is parallel to the Top cover and so
that the interlock switch is actuated 2 mm before Top cover is closed measu-
red on front side beneath handle.
4. Tighten nuts [A] ( x2).
[A]
[B]
Click on the first or last page to see other MX-BMX1 (serv.man2) service manuals if exist.