Read Sharp MX-BM50 (serv.man7) User Guide / Operation Manual online
7
65
Best practice for the MX-BM50 system
• If the set is not properly registered (side jogged and back jogged) changing to a smaller
custom size of paper in the MX-BM50 may improve the situation.
• If staples have problems penetrating thicker sets of heavy media changing staple car-
tridge may improve the situation.
• If the booklets show markings or scratches the use of the “protection sheet” will im-
prove the situation.
• Book Fold module MX-FD50 may wrinkle the cover at the spine when light weight me-
dia is used for cover sheet. Changing to heavier stock or turning book fold module off
usually fixes the problem.
• Staple may be radius shaped (bent) when running with Book Fold module. Moving sta-
ple position so staple is centered on the spine will reduce this phenomenon.
• Covers may show marking along the spine of the booklet from the clamp in the MX-
FD50 module. The more pages in the booklet, the more evident the marking. The use
of “protection sheet” eliminates this marking.
• For jobs with multiple sheets of 200 gsm or heavier the MX-FD50 module is recom-
mended for an acceptable output. If MX-FD50 module is present in the configuration
the Book Fold shall be turned ON or feed problem at output may occur.
Click on the first or last page to see other MX-BM50 (serv.man7) service manuals if exist.