Read Sharp MX-BM50 (serv.man7) User Guide / Operation Manual online
11
What You Can Do With This Machine
The Booklet Maker MX-BM50, Trimmer MX-TM50, Square Folder MX-FD50 and Cover Feeder
MX-CF50 forms a booklet making system that works online with the Copier.
The Bleed Trimmer trims the long sides of the sheets to shape the print-outs to the desired
format. After that, the print-outs are transported into the stapler area and compiled
From the MX-CF50 Cover Feeder (optional), if present, any type of covers, colored or black
and whites, can be added to the printed set. The Booklet Maker now jogs and then staples
the set. The set is then transported further to the folding area where the set is folded into a
booklet and then fed out to the belt stacker. When a larger number of sheets are folded an
effect called creeping occurs. In order to rectify creep, the MX-TM50 Trimmer (optional) can
be attached after the Booklet Maker. The booklets are then transported from the Booklet
Maker into the Trimmer where the trail edge will be cut off. If a MX-TM50 Trimmer is installed
to the MX-BM50 Booklet Maker, you can attach the MX-FD50 Square Folder (optional). The
printouts, which have been stapled, folded and trimmed will be fed into the MX-FD50. The
MX-FD50 will flatten the spine of the booklet square. The booklets will, after passing the MX-
FD50, have the look of a perfect bound book. The booklets are then fed out to the Belt Stacker.
To facilitate undocking, a MX-BM50 Rail unit (optional) can be installed under the Booklet
Maker system. Undocked or off-line, the Booklet Maker can be used as a stand-alone unit
for hand feeding.
The MX-BM50 Booklet making system is controlled from a user interface/control panel located
MX-CF50 Cover Feeder (option)
MX-TM50 Trimmer (option)
MX-BM50 Booklet Maker
MX-BM50 Rail unit(option)
MX-FD50 Square Folder (option)
Belt Stacker
Click on the first or last page to see other MX-BM50 (serv.man7) service manuals if exist.