Read Sharp MX-B382 (serv.man6) Service Manual online
MX-B382/B402 CONSUMABLE PARTS 2 – 4
5. Life end display
A. Drum cartridge
*1: Selection of Display/Not Display can be made with Sim26-69. (Default: Not Display)
• When the drum cartridge is replaced with a new one, the print counter, the accumulated traveling distance counter, the accumulated rotation
• When the drum cartridge is replaced with a new one, the print counter, the accumulated traveling distance counter, the accumulated rotation
number counter, and the usage day counter are automatically cleared. If SIM26-55 setting is set to ENABLE in that case, the guidance for
execution of the automatic adjustment of the engine is displayed.
execution of the automatic adjustment of the engine is displayed.
• If SIM26-55 setting is set to DISABLE, SIM46-74 must be used to execute the automatic adjustment of the engine.
• If the above guidance does not disappear when the drum cartridge is replaced, SIM24-7 must be executed to clear the print counter, the
• If the above guidance does not disappear when the drum cartridge is replaced, SIM24-7 must be executed to clear the print counter, the
accumulated traveling distance counter, the accumulated rotation number counter, and the usage day counter, and the engine automatic
adjustment must be executed.
adjustment must be executed.
• The above display disappears when the counters are cleared.
B. Developer section
Judgment is made at the earlier timing of the developer print counter or the developer accumulated rotation number counter.
The developer rotation number is synchronized with the drum motor rotation number.
The developer rotation number is synchronized with the drum motor rotation number.
After replacement of developer, use SIM25-2 to set the toner density control level. By this setting, the developer counters (the developer print
counter and the developer accumulated traveling distance counter) are cleared.
counter and the developer accumulated traveling distance counter) are cleared.
C. Toner cartridge
*1: Detected by the toner motor rotation number and the pixel count (The value of larger life percentage is employed.)
*2: Selection of Display/Not Display can be made with Sim26-69. (Default: Not Display)
*3: Setting can be made with Sim26-69. (Default: 0 sheet)
*2: Selection of Display/Not Display can be made with Sim26-69. (Default: Not Display)
*3: Setting can be made with Sim26-69. (Default: 0 sheet)
Display content
Display condition
Print job
Enable/
Disable
Disable
Sim26-38-E
set value
Counter name
Counter value
Change the supplies. > Drum Cartridge
0 (Print continue)
Drum cartridge print counter
When 72K is reached
Enable
Drum cartridge accumulated rotation number
When 550K rotations is reached
Enable
The supplies will be needed soon.
> Drum Cartridge *1
> Drum Cartridge *1
1 (Print stop)
Drum cartridge print counter
When 90% of 72K is reached by the
counter
counter
Enable
Drum cartridge accumulated rotation number
When 90% of 550K rotation is
reached by the counter
reached by the counter
Enable
Change the supplies. > Drum Cartridge
1 (Print stop)
Drum cartridge print counter
When 72K is reached
Enable
When 72K + 1K is reached
Disable
Drum cartridge accumulated rotation number
When 550K rotations is reached
Enable
When 550K rotation + 430Kmm is
reached
reached
Disable
Counter name
End conditions
Message when end over
Sim.26-38A “0”
Print Enable
Sim.26-38A “1”
Print Stop
Developer print counter (K)
72,000 [sheets]
Message (9)
Message (9)
Developer accumulated rotation number (K)
550K rotations
Message (9)
Message (9)
Message
No.
Message
Print job
Enable/Disable
(9)
Maintenance required.Code: VK
Enable
Display content
Display condition
Print job
Enable/
Disable
Disable
Remaining
quantity display *1
Status
The supplies will be needed soon. > Toner Cartridge *2
25-0%
Toner remaining quantity is 25% or less.
Enable
25-0%
Toner remaining quantity corresponds to output of XX sheets. *3
Enable
Change the supplies. > Toner Cartridge
0%
When the toner cartridge reaches toner end.
Disable
No display
50-25%
Toner remaining quantity is 49 - 25%.
Enable
No display
75-50%
Toner remaining quantity is 74 - 50%.
Enable
No display
100-75%
Toner remaining quantity is 100 -75%.
Enable
Install the toner cartridge.
No display
When no toner cartridges are installed.
Disable
Improper cartridge.
No display
When an incompatible toner cartridge is installed.
Disable
Cartridge error.
No display
CRUM trouble
Toner cartridge connector contact trouble
Toner cartridge connector contact trouble
Disable
Click on the first or last page to see other MX-B382 (serv.man6) service manuals if exist.