Read Sharp MX-B382 (serv.man4) Handy Guide online
Coin Vend Interface
20
SHARP
Document Solution Centre
All MX-B series machines have a coin vend interface located on the PCU Main PWB. The vending
device activates various signals to indicate paper sizes and operation.
device activates various signals to indicate paper sizes and operation.
Connector Manufacture:
JST (
www.jst.com
)
Connector Type
PND series
Connector Part Code (Wire Side)
PNDP-16V-Z
Before connecting a third party auditor, the device should confirm to the following:-
1. The auditor interface should be optically isolated from the copier.
2. The device should be Power Supply Unit independent.
3. The device power supply unit should be a plug top adapter, not internal.
4. The plug top adapter should have a reinforced insulation barrier.
5. The audit device MUST comply and display the relevant safety approval mark (C-Tick, CE
or equivalent).
To enable coin vend function, test simulation 26
–03 should be set as required:-
Coin Vendor Mod
e
Diagnostic
Setting
The specified
quantity is
completed.
Remainder of
money is left
Insufficient money during copy job
The specified
quantity is
completed.
No money
remaining
Black/Colour
(No money
remaining)
Colour
(Remainder of
money left)
Condition 1
Condition 2
Condition 3
Condition 4
MODE 1
Operation 1
Operation 2
Operation 2
Operation 1
MODE 2
Operation 1
Operation 1
Operation 2
Operation 1
MODE 3
Operation 1
Operation 3
Operation 2
Operation 3
OPERATION 1
Wait for auto clear setting time
(Default 60sec
(Default 60sec
– can be changed by the system setting)
OPERATION 2
Auto clear is not made.
OPERATION 3
Setting is immediately cleared.
Cont’d
Click on the first or last page to see other MX-B382 (serv.man4) service manuals if exist.