MX-B381, MX-B401 (serv.man8). INSTALLATION MANUAL - Sharp Copying Equipment Service Manual (repair manual). Page 16

MX-B381/B401  MX-CSX1/CSX2 (500-SHEET PAPER FEED UNIT)  2 – 4

1)

Enter the SIM50-28 mode.

2)

Select [SETUP/PRINT ADJ].

3)

Select [ALL].

NOTE: When [ALL] is selected, the adjustments of the follow-

ing two items are performed at a same time.

* [LEAD]: Print image lead edge image position adjustment
* [OFFSET]: Print image off-center adjustment

4)

Select the paper feed trays to be adjusted. (Select all the
trays.)
Set A4 (11" x 8.5") paper in each paper feed tray in advance.

5)

Press [EXECUTE] key.
The adjustment pattern is printed out. (Paper is fed from the
selected paper feed tray, and the adjustment pattern of each
paper feed tray is printed out.)

6)

Set the adjustment pattern in the center reference on the docu-
ment table.
NOTE: Fit the adjustment pattern correctly with the document 

guide.

7)

Press [EXECUTE] key.

The following item is automatically adjustment.
* Print image lead edge image position adjustment
* Print image off-center adjustment
Perform the procedures of 6) - 7) for the printed adjustment
pattern of each paper feed tray.

8)

Press [OK] key. (For the 4.3 Inch LCD model, press the OSA
shortcut key.)
The adjustment result becomes valid.

NOTE: When an error occurs in the automatic adjustment of

SIM50-28, place white paper on the adjustment pattern and
perform the adjustment.