MX-B201D (serv.man7). Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 6

MX-NB11  UNPACKING AND INSTALLATION  4 - 2

4)

Fit the bottom of the network board into the PWB hook.

5)

Insert the connectors of the Ether in the openings of the sheet
metal.

Note: Securely insert the LAN connector into the opening of the

plate before tightening the screw to fix the PWB.

6)

Tighten the five screws (M3 x 6) which are included together
with the MX-NB11.

7)

Make a connection between the Network Board and the main
body’s MCU PWB with the two harnesses which are included
together with the MX-NB11.

8)

Affix the sheet for the rear cabinet to the rear cabinet.

9)

Attach the rear cabinet. (Tighten the screws again.)

Note: When booting the machine for the first time after installation

of the MX-NB11, set the date and the time in the copy mode
[31] of the user program.
For the user program setting, refer to “[12] USER PRO-
GRAM” in the MX-B201D Service Manual.

Ether connectors