Read Sharp MX-B200 (serv.man8) User Guide / Operation Manual online
8
8
66
This chapter describes how to replace the toner cartridge and how to clean the unit.
TONER CARTRIDGE REPLACEMENT
When the toner cartridge replacement required (
) indicator lights up, replacement
of the toner cartridge will be needed soon. Obtain a new cartridge. When the toner
cartridge replacement required (
cartridge replacement required (
) indicator blinks, the toner cartridge must be
replaced before copying can be resumed. Replace the toner cartridge by following
the procedure below.
the procedure below.
1
Open the multi-bypass tray,
and then open the side
cover while pressing the
side cover open button.
and then open the side
cover while pressing the
side cover open button.
2
Push gently on both sides of the
front cover to open the cover.
front cover to open the cover.
Be sure to use only genuine SHARP parts and supplies.
• After the unit stops, it may be possible to make a few more copies by
taking the toner cartridge out of the unit, shaking it horizontally, then
reinstalling it. If copying is not possible after this operation, replace the
toner cartridge.
reinstalling it. If copying is not possible after this operation, replace the
toner cartridge.
• During long copy run of a dark original, the start (
) indicator may
blink, the indicator light up, and the unit stop, even though toner is left.
The unit will feed toner up to 2 minutes and then the start (
The unit will feed toner up to 2 minutes and then the start (
)
indicator will light up. Press the start (
) key to restart copying.
MAINTENANCE
Click on the first or last page to see other MX-B200 (serv.man8) service manuals if exist.