Read Sharp MX-AP14 Service Manual online
MX-AP14 UNPACKING AND INSTALLATION 3 – 2
5)
Install RS-232C Unit (Packed item No.10) to MFP PWB Unit.
Put the connector through the MFP PWB Unit and fix it with
RIC fixing screw. (Packed item No.12)
Put the connector through the MFP PWB Unit and fix it with
RIC fixing screw. (Packed item No.12)
6)
Connect the cable to the MFP PWB.
7)
Put MFP PWB back to the MFP and all the covers removed.
B. Install the Main unit to the MFP
1)
Attach the locking saddle (Packed item No.6) to the Main unit.
2)
Remove the back cover from the desk.
3)
Make hole for screw installation through the hollow of the
cover surface with screwdrivers.
cover surface with screwdrivers.
4)
Temporarily fix the screw (Packed item No.8) midway.
5)
Hang a main unit (Packed item No.1) to the screw which did
procedure 4) and fix it with a screw (Packed item No.9) for
installation.
procedure 4) and fix it with a screw (Packed item No.9) for
installation.
Click on the first or last page to see other MX-AP14 service manuals if exist.