MX-6580N, MX-7580N (serv.man3). Service Manual (Revised June 2017). - Sharp Copying Equipment Service Manual (repair manual)

mx-6580n, mx-7580n (serv.man3) service manual
Model
MX-6580N MX-7580N (serv.man3)
Pages
127
Size
65.6 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Service Manual (Revised June 2017).
File
mx-6580n-mx-7580n-sm3.pdf
Date

Read Sharp MX-6580N / MX-7580N (serv.man3) Service Manual online

SERVICE MANUAL
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
NOTE FOR SERVICING
[1]
PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[2]
SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
[3]
CONSUMABLE PARTS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
[4]
EXTERNAL VIEW AND INTERNAL STRUCTURE  . . . . . . . . . . . . . . . . . . . . . . . . 4-1
[5]
ADJUSTMENTS AND SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
[6]
SIMULATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
[7]
SELF DIAG AND TROUBLE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
[8]
FIRMWARE UPDATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[9]
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
[10] DISASSEMBLY AND ASSEMBLY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
[11] OPERATIONAL DESCRIPTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
[12] ELECTRICAL SECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
[13] OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
TopPage
CONTENTS
CODE: 00ZMX7580/S3E
MX-6580N
MX-7580N
MODEL
DIGITAL FULL COLOR 
MULTIFUNCTIONAL SYSTEM
CONTENTS
NOTE FOR SERVICING
1. Precautions for servicing . . . . . . . . . . . . . . . . . . . . . . . . . i
2. Warning for servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
3. Note for installing site. . . . . . . . . . . . . . . . . . . . . . . . . . . . i
4. Note for handling PWB and electronic parts  . . . . . . . . . .ii
5. Note for repairing/replacing the LSU . . . . . . . . . . . . . . .  iii
6. Note for handling the drum unit, the transfer unit, 
the developing unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  iii
7. Screw tightening torque . . . . . . . . . . . . . . . . . . . . . . . . .  iii
[1]
PRODUCT OUTLINE
1. System diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
2. Option list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
[2]
SPECIFICATIONS
1. Basic specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2. Copy functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
3. Printer function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
4. FAX function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
5. Image send function. . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
6. Report/list function . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
7. Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
8. Dimensions and Weight . . . . . . . . . . . . . . . . . . . . . . . 2-13
9. Ambient conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
[3]
CONSUMABLE PARTS
1. Supply system table. . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
2. Maintenance parts list  . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
3. Definition of developer/drum life end . . . . . . . . . . . . . . 3-5
4. Production number identification . . . . . . . . . . . . . . . . . 3-5
5. Environmental conditions . . . . . . . . . . . . . . . . . . . . . . . 3-6
[4]
EXTERNAL VIEW AND INTERNAL STRUCTURE
1. External view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
2. Internal structure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
3. DSPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
4. Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
5. Operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
6. Sensors and detectors . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
7. Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
8. Clutches and solenoids . . . . . . . . . . . . . . . . . . . . . . . 4-13
9. Drive motors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
10. Lamps  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
11. Gates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23
12. Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18
13. Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19
14. PWB/Memory device . . . . . . . . . . . . . . . . . . . . . . . . . 4-20
15. Fuses and thermostats  . . . . . . . . . . . . . . . . . . . . . . . 4-17
16. Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23
[5]
ADJUSTMENTS AND SETTINGS
1. General  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
2. Adjustment item list . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
3. Details of adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
[6]
SIMULATION
1. General and purpose . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
2. Function of each key  . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
3. Starting the simulation . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
4. List of simulation codes . . . . . . . . . . . . . . . . . . . . . . . . 6-2
5. Details of simulation . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
[7]
SELF DIAG AND TROUBLE CODE
1. Error code and troubleshooting . . . . . . . . . . . . . . . . . . 7-1
2. JAM and troubleshooting . . . . . . . . . . . . . . . . . . . . . . 7-51
3. Image send communication report code  . . . . . . . . . . 7-56
4. Dial tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-60
[8]
FIRMWARE UPDATE
1. Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
2. Update procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[9]
MAINTENANCE
1. Works necessary when executing 
the maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
2. Display of maintenance execution timing. . . . . . . . . . . 9-2
3. Maintenance list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
[10] DISASSEMBLY AND ASSEMBLY
1. Disassembly of Units . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
2. Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-39
[11] OPERATIONAL DESCRIPTIONS
1. Operation panel section . . . . . . . . . . . . . . . . . . . . . . . 11-1
2. DSPF section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-3
3. Scanner section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-9
4. Paper feed section . . . . . . . . . . . . . . . . . . . . . . . . . . 11-11
5. Paper transport section  . . . . . . . . . . . . . . . . . . . . . . 11-18
6. LSU section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-23
7. OPC drum section . . . . . . . . . . . . . . . . . . . . . . . . . . 11-26
8. Toner supply section  . . . . . . . . . . . . . . . . . . . . . . . . 11-29
9. Developing section. . . . . . . . . . . . . . . . . . . . . . . . . . 11-31
10. Transfer section . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-33
11. Waste toner section . . . . . . . . . . . . . . . . . . . . . . . . . 11-38
12. Fusing section  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-39
13. Duplex/paper exit section. . . . . . . . . . . . . . . . . . . . . 11-43
[12] ELECTRICAL SECTION
1. Block diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
2. Power line diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . 12-6
3. Actual wiring chart . . . . . . . . . . . . . . . . . . . . . . . . . . 12-12
[13] OTHERS
1. VARIOUS STORAGE DATA HANDLING . . . . . . . . . . 13-1
MX-7580N  NOTE FOR SERVICING   - i
MX-7580N
Service Manual
 
NOTE FOR SERVICING
1. Precautions for servicing
• When servicing, disconnect the power plug, the printer cable, the
network cable, and the telephone line from the machine, except
when performing the communication test, etc.
It may cause an injury or an electric shock.
• There is a high temperature area inside the machine. Use
extreme care when servicing.
It may cause a burn.
• There is a high voltage section inside the machine which may
cause an electric shock. Be careful when servicing.
• Do not disassemble the laser unit. Do not insert a reflective
material such as a screwdriver in the laser beam path.
It may damage eyes by reflection of laser beams.
• When servicing with the machine operating, be careful not to
squeeze you hands by the chain, the belt, the gear, and other
driving sections.
• Do not leave the machine with the cabinet disassembled.
Do not allow any person other than a serviceman to touch inside
the machine. It may cause an electric shock, a burn, or an injury.
• When servicing, do not breathe toner, developer, and ink exces-
sively. Do not get them in the eyes.
If toner, developer, or ink enters your eyes, wash it away with
water immediately, and consult a doctor if necessary.
• The machine has got sharp edges inside. Be careful not to dam-
age fingers when servicing.
• Do not throw toner or a toner cartridge in a fire. Otherwise, toner
may ignite and burn you.
• When replacing a lithium battery on a PWB, only use the speci-
fied replacement battery.
If a battery of different specification is used, it may cause a
machine malfunction or breakdown.
• When carrying a unit with PWB or electronic parts installed to it,
be sure to put it in an anti-static-electricity bag.
It may otherwise cause a machine breakdown or malfunction.
2. Warning for servicing
• Be sure to connect the power cord only to a power outlet that
meets the specified voltage and current requirements.
Avoid complex wiring, which may lead to a fire or an electric
shock.
It may cause a fire or an electric shock.
• If there is any abnormality such as a smoke or an abnormal
smell, interrupt the job and disconnect the power plug.
It may cause a fire or an electric shock.
• Be sure to connect the grounding wire. If an electric leakage
occurs without grounding, a fire or an electric shock may result.
To protect the machine and the power unit from lightening,
grounding must be made.
• When connecting the grounding wire, never connect it to the fol-
lowing points.
 Gas tube
 Lightning conductor
 A water pipe or a water faucet, which is not recognized as a
grounding object by the authorities.
 Grounding wire for telephone line
It may cause an explosion, a fire or an electric shock.
• Do not damage, break, or stress the power cord.
Do not put heavy objects on the power cable. Do not stress, forc-
ibly bend, or pull the power cord.
It may cause a fire or an electric shock.
• Keep the power cable away from a heat source.
Do not insert the power plug with dust on it into a power outlet.
It may cause a fire or an electric shock.
• Do not place liquids or foreign metallic objects inside the
machine.
It may cause a fire or an electric shock.
• Do not touch the power cord, insert the phone jack, operate the
machine, or perform service on the machine with wet or oily
hands.
It may cause an electric shock.
3. Note for installing site
Do not install the machine at the following sites.
• Place of high temperature, high humidity, low temperature,
low humidity, place under an extreme change in temperature
and humidity.
Paper may get damp and form condensation inside the machine,
causing paper jam or copy dirt.
For operating and storing conditions, refer to the specifications
described later.
• Place of extreme vibrations
It may cause a breakdown.
• Poorly ventilated place
An electrostatic type copier will produce ozone.
The quantity of ozone produced is designed to a low level so as
not to affect human bodies. However, continuous use of such a
machine may produce an ozone smell. Install the machine in a
well ventilated place.
CAUTION
DOUBLE POLE/NEUTRAL FUSING
MX-7580N  NOTE FOR SERVICING   - ii
• Place of direct sunlight.
Plastic parts and ink may be deformed, discolored, or may
undergo qualitative change.
It may cause a breakdown or output quality problems.
• Place which is full of organic gases such as ammonium
The organic photo-conductor (OPC) drum used in the machine
may undergo qualitative change due to organic gases such as
ammonium.
Installation of this machine near a diazo-type copier and blue
print machine may result in poor quality output.
* There was a trouble in a place where silicon-series gas or vol-
atile components are generated. Use great care for avoiding
this.
• Place of much dust
When dust or contaminants enters the machine, it may cause a
breakdown or poor quality output.
• Place near a wall
The machine will require ventilation.
If ventilation is not proper, poor output or machine failure may
result.
• Unstable or irregular surface
If the machine is dropped or tips over, it may cause injury or
machine malfunction.
Use an optional desk or an exclusive-use desk.
When using the optional desk, be sure to fix the adjuster and lock
the casters.
4. Note for handling PWB and electronic parts
When handling the PWB and the electronic parts, be sure to
observe the following precautions in order to prevent against dam-
age by static electricity.
• When in transit or storing, put the parts in an anti-static bag or an
anti-static case and do not touch them with bare hands.
• When and after removing the parts from an anti-static bag (case),
use an earth band as shown below:
• Put an earth band to your arm, and connect it to the machine.
• When repairing or replacing an electronic part, perform the
procedure on an anti-static mat.
11-13/16" 
(30cm)
11-13/16" 
(30cm)
17-23/32" 
(45cm)
Page of 127
Display

Download Sharp MX-6580N / MX-7580N (serv.man3) Service Manual (Repair Manual)

Here you can read online and download Sharp MX-6580N / MX-7580N (serv.man3) Service Manual in PDF. MX-6580N / MX-7580N (serv.man3) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp MX-6580N / MX-7580N (serv.man3) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.