Read Sharp MX-6580N / MX-7580N (serv.man2) Handy Guide online
SHARP
MAINTENANCE
23
Every
300K
Every
600K
DSPF – DOCUMENT FEEDER:
Check/Clean SPF Pick-Up, Paper Feed & Separation Rollers (check SPF counter using
Sim 22-08) – replace every 100k or after 1 year.
Sim 22-08) – replace every 100k or after 1 year.
Check/Clean SPF Paper Feed Torque Limiter – replace every 800k.
Check/Clean ALL Transport Rollers.
Check/Clean Second Scan Section Scanning Glass.
Check/Clean Lamp Section & Reflector.
TRANSFER SECTION:
Replace Primary (Image) Transfer Belt Kit (MX-620B1):-
•
Primary Transfer Belt
•
Transfer Belt Separation Pawl
Replace Primary Transfer Cleaning Blade (MX-751TL)
Replace Primary Transfer Cleaning Roller (MX-751C1).
Apply Yellow Toner [CKOG-0345DS51] to Primary Transfer Belt
Replace Secondary Transfer Belt (MX-620B2)
Replace Secondary Transfer Blade (MX-620TG)
Clean ID & Registration Sensors.
Sim 24-04
Clear TC1 BELT Counters (Total, Day & Rotation).
Clear TRANS BLADE Counters (Total, Day & Rotation).
Clear TC2 BELT Counters (Total, Day & Rotation).
Clear TC2 TRANS BLADE Counters (Total, Day & Rotation).
Sim 50-22
Drum Position & Registration Adjustment - select ALL.
Every
300K
Every
600K
FUSING SECTION:
Replace Fusing Belt Kit (MX-751FB):-
•
Fusing Belt
•
Meandering Restraint Collar x 2
•
Wave Washer x 2
Replace Fusing Roller Kit (MX-751HK):-
•
Fusing Roller
•
Fusing Roller Bearing x 2
•
Heat Roller
•
Heat Roller Bearing x 2
•
Insulation Bush x 2
Replace Pressure Roller Kit (MX-750LH):-
•
Pressure Roller
•
Pressure Roller Gear
•
Pressure Roller Bearing x 2
•
Lower Separation Pawl x 5
•
Lower Separation Pawl Spring x 5
•
24T Gear
Click on the first or last page to see other MX-6580N / MX-7580N (serv.man2) service manuals if exist.