Read Sharp MX-6500N / MX-7500N Handy Guide online
33
2) Fine-tune the staple position in relation to the fold
position for saddle folding.
The 10-key pad appears when the textbox is tapped.
Enter the desired value.
Input range: [20] to [80] (1 = 0.1 mm)
Default: [50]
3.1.6 Paper Alignment Width Adjustment for
Saddle Stitch/Saddle Fold
Modes the adjustment is effective in:
Copy and printer modes
Overview:
This performs jogger width adjustment for saddle stitch
and saddle fold.
Set this adjustment when the stapled stuck of paper is not
aligned.
Symptoms that may be alleviated by the adjustment:
Paper edge misalignment for saddle stitch and fold
Adjustment Procedure:
1) Select [Paper Alignment Width Adjustment for Saddle
Stitch/Saddle Fold] in the Saddle Finisher screen.
2) Adjust the distance between the alignment plates in the
direction of paper width for saddle stitching/saddle
folding.
The 10-key pad appears when the textbox is tapped.
Enter the desired value.
Input range: [80] to [120] (1 = 0.20944 mm)
Default: [100]
3.2
Trimming Module
Select [Trimming Module] in the Peripheral Adjustment
screen.
3.2.1 Trimming Original Point Adjustment
Modes the adjustment is effective in:
Copy and printer modes
Overview:
This performs adjustment of trimming origin position for
saddle stitch (fold and staple).
This corrects deviation of the actual cutting amount from
the amount set with the trimming setting.
Symptoms that may be alleviated by the adjustment:
Gap of trimming amount between specified value and
actual trimming amount
Adjustment Procedure:
1) Select [Trimming Original Point Adjustment] in the
Trimming Module screen.
2) Adjust the trimming original point for saddle stitching.
The 10-key pad appears when each of the textboxes is
tapped. Enter the desired values.
Input range: [50] to [150] (1 = 0.1 mm)
Default: [100] for each
Click on the first or last page to see other MX-6500N / MX-7500N service manuals if exist.