Read Sharp MX-6500N / MX-7500N (serv.man87) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-1632R
【
Item of change
】
No.
Item
Detail
1
Main unit
control
Modification has been made to be able to switch the threshold value of the long size paper by Soft SW.
SIM55-3, SW33, Data7
0: 384mm or less size: 1-count, 385mm or more and 630mm or less size: 2-count (as before)
1: 488mm or less size: 1-count, 489mm or more and 630mm or less size: 2-count
*Counting value needs to be set to “2” with SIM26-05 in accordance with the setting above.
SIM55-3, SW33, Data7
0: 384mm or less size: 1-count, 385mm or more and 630mm or less size: 2-count (as before)
1: 488mm or less size: 1-count, 489mm or more and 630mm or less size: 2-count
*Counting value needs to be set to “2” with SIM26-05 in accordance with the setting above.
2
Main unit
control
For prevention of the jam with the glossy paper, the print void adjustment in the item of administrator adjustment has
been added to Paper Settings so that the void adjustment is available for each paper.
been added to Paper Settings so that the void adjustment is available for each paper.
3
Main unit
control
Correction of the problem that the status notification processing between the internal modules cannot complete correctly,
which may result in L8-20 trouble.
which may result in L8-20 trouble.
4
Main unit
control
Correction of the following problems due to the internal processing of the job completion not working correctly:
*FAX reception stops due to the pre-set limit.
*FAX reception stops due to the pre-set limit.
*Job may disappear when outputting the print data.
5
Main unit
control
Correction of the trouble that the performance is reduced when performing the large volume print with the coin vendor
connected.
connected.
6
Main unit
control
Correction of the problem that the setting range of the paper weight of Paper Settings that has been set up to User Type6
is limited to 60-105gsm.
is limited to 60-105gsm.
7
Main unit
control
Following problem has been corrected:
When reaching the limit number of pages with External authentication, the machine may lock up while displaying "Please
wait."
When reaching the limit number of pages with External authentication, the machine may lock up while displaying "Please
wait."
8
Main unit
control
Correction of the problem that the Trimmer feature in Copy mode becomes unavailable when using the accounting
application.
application.
9
Main unit
control
Correction of the following problem:
When printing more than one files in Document Filling, the print processing cannot be completed, which may cause the
lockup of the machine.
When printing more than one files in Document Filling, the print processing cannot be completed, which may cause the
lockup of the machine.
10
Main unit
control
Correction of the problem that the auto-registered user is not contained in the data of E-RIC.
11
Main unit
control
Tray switching speed in LCT has been improved.
12
Main unit
control
Correction of the problem that the jam may occur when performing the duplex copy with the back cover if the vender is
connected.
connected.
13
Main unit
control
Correction of the problem that the "“Side2 X” setting of “Side1/2, XY Print Position” in Paper Settings may be reflected also
in Side1.
in Side1.
14
Main unit
control
Addition of Soft SW to select the feed amount for fusing web at the time of Full Bleed printing as the countermeasure of
the problem that the life of fusing WEB becomes shorter when performing Full bleed printing.
SIM55-1 SW31 Data3
0: Web feed amount at the time of Full bleed printing (Default)
1: Same feed amount as the normal time
the problem that the life of fusing WEB becomes shorter when performing Full bleed printing.
SIM55-1 SW31 Data3
0: Web feed amount at the time of Full bleed printing (Default)
1: Same feed amount as the normal time
15
Main unit
control
Correction of C4-20 trouble which may occur due to the misdetection
16
Main unit
Web
Correction of the problem that the icon is displayed but the name is not displayed when registering the address to Home
screen.
screen.
17
Image Quality Addition of Engine Auto Adjustment to Machine Adjustment for the purpose to simplify the calibration procedure.
18
Image Quality
Support of fusing refresh feature along with the new setup of the maintenance option (Fusing belt refresh tool)
(CCE-1631)
(CCE-1631)
19
Image Quality Chart data for face-back matching has been changed.
20
Image Quality
Following features have been added for the purpose to improve the banding generated due to the drum revolution:
(1) Forced execution feature of the bias modulation calibration has newly been added to SIM44-32.
(2) Soft SW to select Enable/Disable of the bias modulation adjustment of the drum cycle has been added.
SIM55-1 SW27 Data8
0: Disable (Default)
1: Enable
(1) Forced execution feature of the bias modulation calibration has newly been added to SIM44-32.
(2) Soft SW to select Enable/Disable of the bias modulation adjustment of the drum cycle has been added.
SIM55-1 SW27 Data8
0: Disable (Default)
1: Enable
21
Image Quality Banding on the printed image when using Heavy paper has been improved. (CCE-1631)
22
Image Quality
Addition of Soft SW to select Enable/Disable of Scaling as the countermeasure for the problem that the image whose main
scan direction is over 314mm will be truncated.
SIM55-3 SW34 Data6
0: Disable (Default)
1: Enable
scan direction is over 314mm will be truncated.
SIM55-3 SW34 Data6
0: Disable (Default)
1: Enable
23
Image Quality
Correction of the problem that print result with PCL5 data created without using the printer driver becomes darker than
the print result created by the old model.
the print result created by the old model.
24
Image Quality
Correction of the problem that the print position is misaligned when printing after changing XY Ratio Settings in Paper
Settings
Settings
25
Image Quality
Correction of the problem that the background may be generated when performing the continuous printing with the long
size paper.
size paper.
Click on the first or last page to see other MX-6500N / MX-7500N (serv.man87) service manuals if exist.