MX-6500N, MX-7500N (serv.man20). Section 6 Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 5

Read Sharp MX-6500N / MX-7500N (serv.man20) Service Manual online

MX-7500N  SIMULATION  6 – 5
26
71
Used to set the trial mode of the web browsing function.
73
Enlargement continuous shoot, A3 wide copy mode image loss (shade delete quantity) adjustment
74
Used to set the OSA trial mode.
78
Used to set the password of the remote operation panel.
79
Used to set YES/NO of the pop-up display of user data delete result.
27
1
Used to set non-detection of communication error (U7-00) with RIC. (FSS function)
2
Used to set the sender's registration number and the HOST server telephone number. (FSS function)
4
Used to set the initial call and toner order auto send. (FSS function)
5
Used to set the machine tag No. (This function allows the host computer to check the machine tag No.) 
(FSS function)
Communication (RIC/MODEM)
6
Used to set of the manual service call. (FSS function)
7
Used to set of the enable, alert callout. (FSS function)
9
Used to set the paper transport time recording YES/NO threshold value and shading gain adjustment 
retry number. (FSS function)
10
Used to clear the trouble prediction history information. (FSS function)
11
Used to check the serial communication retry number and the scanner gain adjustment retry number 
history. (FSS function)
12
Used to check the high density, halftone process control and the automatic registration adjustment error 
history. (FSS Function)
13
Used to check the history of paper transport time between sensors. (FSS function)
14
Used to set the FSS function connection test mode.
15
Used to display the FSS connection status.
16
Used to set the FSS alert send.
17
Used to set the FSS paper order alert.
18
Used to clear the FSS paper feed retry counter.
30
1
Used to check the operations of the sensors and the detectors in other than the paper feed section and 
the control circuits.
2
Used to check the operations of the sensors and the detectors in the paper feed section and the control 
circuits.
10
Used to check the operations of the Main unit double feed sensor.
40
2
Manual paper feed tray paper width sensor adjustment.
Paper feed
7
Used to set the adjustment value of the manual paper feed tray paper width sensor.
Paper feed
12
Used to adjust the tray 4 width detection level.
Paper feed
41
1
Used to check the operations of the document size sensor and the control circuit.
2
Used to adjust the document size sensor detection level.
3
Used to check the operations of the document size sensor and the control circuit.
43
1
Used to set the fusing temperature in each mode.
2
Used to set the fusing operation and preheating.
20
Used to set the environmental correction under low temperature and low humidity (L/L) for the fusing 
temperature setting (SIM 43-1) in each paper mode.
21
Used to set the environment correction under high temperature and high humidity (H/H) for the fusing 
temperature setting (SIM 43-1) in each paper mode.
24
Used to set the correction of the temperature adjustment value of SIM 43-1.
32
Used to set various items related to the forcible operation of web cleaning when job end.
Fusing
34
Used to check the fusing lower web cleaning motor operation.
Fusing
35
Fusing nip operation check
Fusing
44
1
Used to set each correction operation function in the image forming (process) section.
Image process (Photoconductor/
Developing/Transfer/Cleaning)
2
Used to adjust the sensitivity of the image density sensor (registration sensor).
Process
4
Used to set the conditions of the high density process control operation.
Process
6
Used to execute the high density process control forcibly.
Process
9
Used to display the result data of the high density process control operation.
Image process (Photoconductor/
Developing/Transfer/Cleaning)
12
Used to display the operation data of the high density process control and the image density sensor 
(registration sensor).
Image process (Photoconductor/
Developing)
14
Used to display the output level of the temperature and humidity sensor.
Process (OPC drum, development)/
Fusing/LSU
15
Used to set the OPC drum idle rotation.
Process
17
Process refresh execution
Process
21
Used to set the halftone process control target.
Process
22
Used to display the toner patch density level in the halftone process control operation.
Process
24
Used to display the correction target and the correction level in the halftone process control operation.
Process
25
Used to set the calculating conditions of the correction value for the halftone process control.
Process
26
Used to execute the halftone process control compulsory.
Process
27
Used to clear the correction data of the halftone process control.
Process
28
Used to set the process control execution conditions.
Process
29
Used to set the operating conditions of the process control during a job.
Process
31
Used to check the deflection of the OPC drum.
Process
37
Used to set the development bias correction level in the continuous printing operation.
43
Used to display the identification information of the developing unit.
Developing system
62
Used to set the process control execution conditions.
Process
Main
Sub
Functions
Section
Page of 127
Display

Click on the first or last page to see other MX-6500N / MX-7500N (serv.man20) service manuals if exist.