MX-6500N, MX-7500N (serv.man20). Section 6 Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 127

Read Sharp MX-6500N / MX-7500N (serv.man20) Service Manual online

MX-7500N  SIMULATION  6 – 127
 
62-12
Purpose
Setting
Function (Purpose)
Used to set Enable/Disable of auto format
in a hard disk trouble.
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value is saved.
data storage area is cleared.
 
62-13
Purpose
Data clear
Function (Purpose)
Used  to  format  the  hard  disk.  (Operation
Manual, watermark data only)
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
The operation manual data are deleted.
When the operation is completed, [EXECUTE] key returns to the
normal display.
 
62-14
Purpose
Data clear
Function (Purpose)
Used to delete the document filing manage-
ment data.
Section
HDD
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key. 
The document filing management data are cleared.
At the same time, the job log data are also cleared.
This simulation is executed in the following trouble cases.
* The document filing function does not work normally.
* The job log is not recorded normally.
NOTE:
This simulation may not function with some firmware versions.
In such a case, the firmware must be upgraded to the latest ver-
sion.
 
62-20
Purpose
Operation test/check
Function (Purpose)
Used to check the operation of the mirror-
ing hard disk.
Section
Mirroring hard disk
Operation/Procedure
Enter the simulation mode, and the operation status of the HDD is
displayed.
The status display is renewed in every second.
 
63
 
63-1
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used  to  display  the  shading  correction
result.
Section
Scanner
Operation/Procedure
1) Select  a  target  color  to  display  with  [R]  [G]  [B]  on  the  touch
panel.
Item
Content
Default value
A
0
Enable
1
1
Disable
Display
Content description
OK
Normal operation
NONE
Not connected
REBUILDING
Data rebuilding
ERROR
Error occurrence
TROUBLE
Trouble
Button
Display 
item
Description
Remarks
OC
ANALOG 
GAIN ODD
Analog gain 
adjustment value 
(odd number)
ANALOG 
GAIN 
EVEN
Analog gain 
adjustment value 
(even number)
DIGITAL 
GAIN ODD
Digital gain 
adjustment value 
(odd number)
DIGITAL 
GAIN 
EVEN
Digital gain 
adjustment value 
(even number)
SMP AVE 
ODD
Reference plate 
sampling average 
value (odd number)
SMP AVE 
EVEN
Reference plate 
sampling average 
value (even number)
TARGET 
VALUE
Target value
BLACK 
LEVEL
Black output level
ERROR 
CODE
Error code (0, 1 - 14)
0: No error
1: STAGE1. Loop 
number over
2: STAGE2. The 
target value is less 
than the specified 
level.
3: STAGE3. The gain 
set value is 
negative.
4: END is not 
asserted. (Gain 
adjustment)
5: (reserve)
6: STAGE2. 
Underflow
Page of 127
Display

Download Sharp MX-6500N / MX-7500N (serv.man20) Service Manual (Repair Manual)