Read Sharp MX-6500N / MX-7500N (serv.man12) Service Manual online
MX-7500N MX-7500N/6500N (MAIN UNIT) 2 – 3
(2) Scanner (2/3 mirror unit) lock release
1) Remove the optical unit fixing screw, and remove the note
label.
C. Attach the operation panel
1) Install the Panel arm ( Packed item No.3) by fixing the scr ews
(2: Packed item No.16, 3: Packed item No.14).
2) Put the Arm cover A (Packed item No.4) temporarily as the fig-
ure below.
3) Install the Panel ( Packed item No.5) by fixing the screws
(Packed item No.14).
4) Arrange the wire and fix the screw as the figure below.
NOTE: Handle the connectors with care not to make damage
to the connector when connecting.
NOTE: Connect the connectors vertically to the PWB.
NOTE: When arranging the cable, never twist it.
NOTE: Handle the connectors with care not to make damage
NOTE: When arranging the cable, never twist it.
NOTE: Handle the connectors with care not to make damage
to the connector by snagging them when wiring.
5) Install the Arm cover B (Packed item No.6) by fixing the screws
(Packed item No.14).
Click on the first or last page to see other MX-6500N / MX-7500N (serv.man12) service manuals if exist.