MX-6500N, MX-7500N (serv.man11). Service Manual (Revised May 2017). - Sharp Copying Equipment Service Manual (repair manual). Page 27

MX-7500N  EXTERNAL VIEW AND INTERNAL STRUCTURE  4 – 1

MX-7500N

Service Manual

 

*: Peripheral device.
 

1

Operation panel

This is used to select functions and enter the number of copies.

2

Punch module *

This is used to punch holes in output. Requires the finisher (large stacker) or the saddle stitch finisher (large 
stacker).

3

Saddle stitch finisher 
(100-sheet stapling) *

This can be used to staple output. The saddle stitch function for folding and stapling output and the fold function for 
folding output in half are also available.
A punch module can also be installed to punch holes in output.

4

Trimming module *

When center stapling is executed, the extended section can be cut.

5

Folding unit *

When outputting different paper sizes such as A3 and A4, the larger size paper can be Z-folded to align with the 
smaller size paper.

6

Paper cart *

This cart is attached to the large capacity stacker.

7

Inserter *

The cover paper and the inserted paper inserted to the printed paper can be set. By the off-line finish function, paper 
can be directly sent to the finisher or the saddle finisher, executing stapling, punching, and folding.

8

Curl correction unit *

Corrects curl of printed paper properly.

9

Paper pass unit *

Feeds paper to the main machine.

10

Large capacity trays *

This holds paper. The capacity of each tray is max. 2,750 sheets.

11

Bypass tray *

In manual paper feed, paper is manually inserted into this tray.
When setting A4R or 8-1/2" x 11"R or greater, extend the auxiliary guide.

12

Status indicator *

The machine status is indicated by the LED.

13

High capacity stacker *

This holds paper. Up to 5250 sheets of paper can be loaded.
Upper stage tray: 250 sheets
Lower stage tray: 5000 sheets (80g/m

2

)