Read Sharp MX-6240N / MX-7040N (serv.man29) Service Manual online
MX-7040N DISASSEMBLY AND ASSEMBLY 10 – 10
3)
Disconnect the connector, and remove the snap band.
Remove the resin E-ring, and remove the transport roller
clutch.
Remove the resin E-ring, and remove the transport roller
clutch.
CAUTION: When assembling, check to confirm that the clutch stop-
per section is engaged with the plate.
4)
Disconnect the connector. Remove the screw, and remove the
DSPF cooling fan.
DSPF cooling fan.
5)
Loosen the screw, and loosen the belt tension. Tighten the
screw.
screw.
6)
Disconnect the connector. Remove the screw, and remove the
drive transport unit.
drive transport unit.
(11) DSPF driver PWB
1)
Remove the rear cabinet.
2)
Disconnect the connector. Remove the screw, and remove the
DSPF driver PWB.
DSPF driver PWB.
(12) DSPF control PWB
1)
Remove the rear cabinet.
2)
Disconnect the connector, and remove the screw. Remove the
control PWB unit.
control PWB unit.
3)
Disconnect the connector, and remove the screw. Remove the
DSPF control PWB.
DSPF control PWB.
2
1
3
4
1
2
3
1
1
2
2
2
2
1
2
3
Click on the first or last page to see other MX-6240N / MX-7040N (serv.man29) service manuals if exist.