Read Sharp MX-6240N / MX-7040N (serv.man28) Service Manual online
MX-7040N MAINTENANCE 9 – 3
E. OPC drum
* After execution of the maintenance, execute SIM24-4 to clear the OPC drum print counter, the accumulated number of rotations counter, and
the use day counter.
F. Developer
* After execution of the maintenance, execute SIM24-4 to clear the developer print counter, the accumulated number of rotations counter, and
the use day counter.
G. Waste toner box
* When the waste toner box is replaced with an empty one, the message disappears.
H. Toner cartridge
Code
Counter name
Display condition
SIM26-38-A set value
Print JOB Enable/Disable
DK
OPC drum print counter (K)
OPC drum accumulated number of rotations (K)
OPC drum accumulated number of rotations (K)
When 300K sheets is reached, or
when 1,000K rotations is reached.
when 1,000K rotations is reached.
0 (Print continue)
Enable
1 (Print stop)
D (C/M/Y)
OPC drum print counter (C/M/Y)
OPC drum accumulated number of rotations (C/M/Y)
OPC drum accumulated number of rotations (C/M/Y)
When 200K sheets is reached, or
when 1,000K rotations is reached.
when 1,000K rotations is reached.
0 (Print continue)
Enable
1 (Print stop)
Code
Counter name
Display condition
SIM26-38-A set value
Print JOB Enable/Disable
VK
Developer print counter (K)
DV unit accumulated number of rotations (K)
DV unit accumulated number of rotations (K)
When 600K sheets is reached, or
when 2,000K rotations is reached.
when 2,000K rotations is reached.
0 (Print continue)
Enable
1 (Print stop)
V (C/M/Y)
Developer print counter (C/M/Y)
DV unit accumulated number of rotations (C/M/Y)
DV unit accumulated number of rotations (C/M/Y)
When 400K sheets is reached, or
when 2,000K rotations is reached.
when 2,000K rotations is reached.
0 (Print continue)
Enable
1 (Print stop)
Code
Counter name
Display condition
Display message
SIM26-38-A
set value
Print JOB
Enable/Disable
—
When near end is detected.
Waste toner full
detection switch ON
detection switch ON
Replacement timing of the
toner collection container is
approaching.
toner collection container is
approaching.
No relation
Enable
—
The pixel count from near end reaches
the specified value.
the specified value.
Specified pixel count
Replace the waste toner
collection box.
collection box.
No relation
Disable
Code
Counter name
Display condition
Display message
SIM26-38-A
set value
Print JOB
Enable/Disable
—
Toner motor rotation time
Specified time of
rotations
rotations
(K/C/M/Y) Prepare a toner
(Near near end)
(Near near end)
No relation
Enable
—
Toner supply amount is decreasing.
Toner remaining
quantity sensor output
quantity sensor output
(K/C/M/Y) Replace the toner
cartridge. (Near end)
cartridge. (Near end)
No relation
Enable
—
The Hopper Remaining Toner after
detection of near end reaches the
specified level.
detection of near end reaches the
specified level.
Specified hopper
remaining count
remaining count
Replace the toner cartridge.
(K) (End)
(K) (End)
No relation
Disable for a JOB which
requires K toner
—
The Hopper Remaining Toner after
detection of near end reaches the
specified level.
detection of near end reaches the
specified level.
Specified hopper
remaining count
remaining count
Replace the toner cartridge.
(C/M/Y) (End)
(C/M/Y) (End)
No relation
Enable for monochrome,
Disable for color
Click on the first or last page to see other MX-6240N / MX-7040N (serv.man28) service manuals if exist.