MX-6240N, MX-7040N (serv.man26). Section 7 Troubleshooting - Updated November 2012 - Sharp Copying Equipment Service Manual (repair manual). Page 69

Read Sharp MX-6240N / MX-7040N (serv.man26) Service Manual online

MX-7040N  TROUBLESHOOTING  7 – 69
When the sub code 2 is "08" or "30" and the communication report is "OK," the report code is "00" or "16."
4. Dial tone
When shipping from the factory, the dial tone detection when sending is set to Enable (changed from OFF to ON). When installing this machine,
be sure to check and confirm that the dial tone is properly detected and the auto dial sending is enabled.
Check to confirm that the continuous buzzer sound is heard when the on-hook key is pressed. (Press the on-hook key again to cancel the
buzzer sound.)
If facsimile communication cannot be executed normally through the IP telephone line, try the general telephone line.
87
The TIFF type of the attached file in received e-mail cannot be recognized.
Header size error
E-mail receive
88
The TIFF type of the attached file in received e-mail cannot be recognized.
Data error
E-mail receive
90
E-mail receive
91
E-mail receive
92
E-mail receive
Report code 2
Content of communication interruption
Send/Receive
Page of 69
Display

Download Sharp MX-6240N / MX-7040N (serv.man26) Service Manual (Repair Manual)