Read Sharp MX-6240N / MX-7040N (serv.man17) Service Manual online
MX-7040N ADJUSTMENTS AND SETTINGS 5 – 36
(Procedures to set the service color balance target and the
color balance target for the user color balance adjustment to
the same color balance as the factory color balance target)
color balance target for the user color balance adjustment to
the same color balance as the factory color balance target)
CAUTION: This procedure must not be executed when the copy
color balance was adjusted with SIM 46-21 to a unique
color balance requested by the user and it was regis-
tered as the service color balance target with SIM 63-7.
When the factory color balance target is changed with
SIM 63-11, be sure to execute this procedure.
color balance requested by the user and it was regis-
tered as the service color balance target with SIM 63-7.
When the factory color balance target is changed with
SIM 63-11, be sure to execute this procedure.
1)
Enter the SIM 63-8 mode.
2)
Press [EXECUTE] key.
3)
Press [YES] key.
The service color balance target and the color balance target for
the user color balance adjustment are set to the same color bal-
ance as the factory color balance target.
the user color balance adjustment are set to the same color bal-
ance as the factory color balance target.
SET 1B Printer color balance adjustment target setup
Color balance target for the printer color balance adjustment
Relationship between the factory target and the service target and the color balance target for the user color balance adjustment in
the printer color balance adjustment (Automatic adjustment) (SIM 46-74/76-24)
the printer color balance adjustment (Automatic adjustment) (SIM 46-74/76-24)
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
67$1'$5'6&$11(57$5*(76(77,1*6(59,&(
(;(&87(
$5(<28685("
<(6
12
Type
Descriptions
A
Factory color
balance (gamma)
target
balance (gamma)
target
There are three kinds of the color balance targets, and each of them is specified according to the machine design. Use SIM 67-26 to
select one of them as the factory target. The default setting (factory setting) is the color balance (DEF1) which emphasizes color
reproduction.
select one of them as the factory target. The default setting (factory setting) is the color balance (DEF1) which emphasizes color
reproduction.
B
Service color
balance (gamma)
target
balance (gamma)
target
This target is used when the user requests to customize the color balance to user's desired level. In advance, the user's unique color
balance must be registered as the service color balance target. The above registration (setting) is made by the serviceman with SIM
67-25 to adjust the color balance and with SIM 67-27 to register it.
This color balance target is used when the user executes the color balance adjustment. When, therefore, the service color balance
target is changed, the color balance target of the user's color balance adjustment is also changed. When, however, SIM 67-28 is
executed, the color balance is set to the factory color balance target set with SIM 67-26. The default setting (factory setting) of the color
balance is same as the factory color balance target. (Emphasized on color reproduction (DEF1))
If the user does not request for customizing the color balance, be sure to use SIM 67-28 to set the color balance to the factory color
balance target.
balance must be registered as the service color balance target. The above registration (setting) is made by the serviceman with SIM
67-25 to adjust the color balance and with SIM 67-27 to register it.
This color balance target is used when the user executes the color balance adjustment. When, therefore, the service color balance
target is changed, the color balance target of the user's color balance adjustment is also changed. When, however, SIM 67-28 is
executed, the color balance is set to the factory color balance target set with SIM 67-26. The default setting (factory setting) of the color
balance is same as the factory color balance target. (Emphasized on color reproduction (DEF1))
If the user does not request for customizing the color balance, be sure to use SIM 67-28 to set the color balance to the factory color
balance target.
C
User color balance
(gamma) target
(gamma) target
Same color balance as the service color balance (gamma) target When the service color balance target is changed, this color balance
target is also changed accordingly.
target is also changed accordingly.
Use SIM 67-26 to select one of the three
kinds of color balance targets.
kinds of color balance targets.
Factory color balance
target (DEF1)
target (DEF1)
Factory color balance
target (DEF2)
target (DEF2)
Factory color balance
target (DEF3)
target (DEF3)
Color balance target in the printer color balance
automatic adjustment (SIM 67-24)
automatic adjustment (SIM 67-24)
Factory color balance
target (one of DEF1 - 3)
target (one of DEF1 - 3)
Execute SIM 67-28.
(The service color balance target is
the same as the factory color balance
target.)
(The service color balance target is
the same as the factory color balance
target.)
Factory setting
Factory color balance
target (DEF1)
target (DEF1)
=
=
Color balance target in the user color balance adjustment
Color balance target for
the user color balance
adjustment
the user color balance
adjustment
Service color balance
target
target
Service color balance
target
target
Service color balance
target
target
Service color balance
target (Unique)
target (Unique)
=
Factory color balance
target (one of DEF1 - 3)
target (one of DEF1 - 3)
Use SIM 67-25 to adjust the optional color
balance, and use SIM 67-27 to register it.
balance, and use SIM 67-27 to register it.
Click on the first or last page to see other MX-6240N / MX-7040N (serv.man17) service manuals if exist.