MX-6240N, MX-7040N (serv.man167). CHANGE OF DESCRIPTION ON FUSING PAPER GUIDE FIXING POSITION IN SERVICE MANUAL - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

Read Sharp MX-6240N / MX-7040N (serv.man167) Technical Bulletin online

 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
CCE-1062 
 
3. The description in the Service Manual 
  
ADJ14
 Fusing paper guide position adjustment 
Normally there is no need to perform this adjustment. In the following cases, perform this 
adjustment. 
  
 
 
* When a paper jam occurs in the fusing section. 
   
 
 
* When wrinkles are made on paper in the fusing section. 
* When an image deflection or an image blur is generated in the paper rear edge section. 
1) Loosen the fusing paper guide fixing screws on the two positions in the front/rear frame 
direction. 
2) Use the fusing paper guide position scale as the reference to shift the paper guide in the 
arrow direction A or B.  
   
 
 
Make sure to shift this paper guide parallel to the standard F/R fixing position. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The standard fixing positions for Front and Rear sides are at the 3
 
scales and 1 scale in 
direction B from the marking scale center, respectively. However, the position may be varied 
depending on the situation.  
  
 
 
* When a wrinkle is made on paper, change the position in the error direction A. 
* When an image deflection or unclear image is generated in the lead edge area of paper, 
change the position in the arrow direction B. 
 
  
 
 
 The Service Manual will be corrected as described above. 
 
4. Action: 
 
 
 
Already been taken from the very beginning of the production. 
 
Page of 2
Display

Download Sharp MX-6240N / MX-7040N (serv.man167) Technical Bulletin