Read Sharp MX-6240N / MX-7040N (serv.man16) Service Manual online
MX-7040N MX-FN19 (FINISHER (50 sheets binding)) 13 – 4
D. Check of the connected position of main unit
and finisher
1) Insert the rail of the finisher into the slit on the rail reception
sheet metal of the main unit, install the finisher.
2) Remove the screw, and remove the connector cover on rear
side of the finisher.
3) Check that the center of the screw hole of the finisher is in the
range of specification of an oval hole of the connection fixture
that exist on main body rear side.
that exist on main body rear side.
* When not the range of specification, progress to the proce-
dure of "E. Adjustment".
If the adjustment is not required, remove the screws from
the screw hole directly and push the caster into it until the
installation fixing.
If the adjustment is not required, remove the screws from
the screw hole directly and push the caster into it until the
installation fixing.
E. Adjustment
1)
Remove the finisher from the main unit.
2)
Remove the screw and remove the lower cover and the front
lower cover.
lower cover.
TopPage
5
: ‘14/Jan
5
Click on the first or last page to see other MX-6240N / MX-7040N (serv.man16) service manuals if exist.