MX-6240N, MX-7040N (serv.man154). ROM UPGRADE (2) - (3) Ver 0200S100 - Sharp Copying Equipment Technical Bulletin (repair manual). Page 3

 

Sharp Electronics (UK) Ltd., Technical Services Group

 

CCE-1104 

No. 

Item 

Details 

21  OSA 

When using Equitrac environment, the Auto Logout occasionally did not function even 
when leaving the machine after logging in to the application.  This problem has been 
corrected. 

22  Copier 

When performing the program registration data which was set to 2-sided print, if the 
paper type which was selected as "Disable Duplex" was set up to the tray, in some 
cases, the checkmark for 2-sided print setting of the program registration would be OFF 
during the process of copying, and then the data would be printed not on the double-
sided but on the single-side.  This problem has been corrected.   

23  Copier 

Modification has been made to store also the paper size for the bypass tray on Copy Job 
Program. 

24  Copier 

When using Tab Paper Copy function, the print result would be displaced.  This problem 
has been corrected.  

25  Copier 

Modification has been made to display the error message in addition to the error sound 
in the case of the condition that Dual Page Copy function cannot be carried out. 

26  Scanner 

Scan to FTP now supports "PASV mode". 

27  PC-FAX 

When performing the PC-Fax broadcast, if the machine was turned OFF/ON with the job 
waiting to be sent, in some cases, the error occurred against the following transmission 
reservation of PC-FAX with the message "Max. number of jobs have been already 
reserved" . 

28  Main unit 

For improvement of registration shift, the temperature correction control and others have 
been reviewed and then improved.  (SIM50-20/61-4 including the improvement of 
registration adjustment pattern)  

29  UI 

When there were a lot of custom folders, displaying the user list screen became slow.  
This problem has been corrected. 

30  UI 

Message which indicates toner end has been changed to “Prepare a new toner”. 

31  Simulation 

Modification has been made to establish "IMS CONTROL" in Auditor setting of SIM26-03 
so that it is selectable whether to enable or disable the limitation of Image Send mode 
when setting Auditor.  (Default: OFF) 

32  E-mail alert 

Modification has been made to be able to select whether to send more than one Alert 
Mails for the same event by Soft switch when recovering from Energy Save.   
SIM55-03   SW No. 28  Data 3 
 0: Send more than one alert mails until the event is cleared. (Default) 
 1: Send the alert mail only once. 

33  Option 

When 1K saddle finisher was installed, MFP locked up when reaching to the maximum 
number of the saddle staple sets.  This problem has been corrected.  

34  Option 

When using the Web browsing extension KIT, the keyboard layout was set to Japanese-
keyboard.  This has been corrected. 

35  Others 

Modification has been made not to export the items (Address Book etc) which should be 
exported with storage backup when exporting the device cloning data from System 
Settings on the machine. 

36  Others 

When moving the device cloning data from the old model that "Default Preview" function 
does not exist, in some cases, the copy job would not be output.  This problem has been 
corrected.  

37  Others 

If the device cloning data of the machine with "Preview" being set was imported to the 
machine with no "Preview" function, the copy would be unable to be performed.  This 
problem has been corrected.  

38  Others 

When the toner door was opened/closed in a short time (approx. 1-sec) during printing, 
in some cases, "Change the toner cartridge" message would be displayed.   This 
problem has been corrected. 

39  Others 

Modification has been made to change the frequency to obtain the information of the 
remaining toner using MIB with SOFT SW.  
 
SIM55-3 SW No. 32  Data 2 
 0: every 25% (Default) 
 1: every 5%