Read Sharp MX-6201N / MX-7001N (serv.man30) Service Manual online
MX-7001N TRAY PAPER FEED SECTION F – 13
1)
Remove the paper feed tray (A).
2)
Disengage the pawl (B), and remove the separation roller (No.
3 / No. 4 paper feed tray) (C).
3 / No. 4 paper feed tray) (C).
c. Transport roller 2, 4 (Drive)
1)
Remove the right lower door, the right cabinet lower, and the
right lower door cover. (Refer to the "[A] EXTERNAL OUT-
FIT".)
right lower door cover. (Refer to the "[A] EXTERNAL OUT-
FIT".)
2)
Remove the waste toner box. (Refer to the “[J] PHOTOCON-
DUCTOR SECTION”.)
DUCTOR SECTION”.)
3)
Remove the tray paper feed unit. (Refer to the "(1) Tray paper
feed unit".)
feed unit".)
4)
Remove the E-ring (A), and remove the belt (B), the pulley (C),
and the parallel pin (D). Remove the E-ring (E), and remove
the bearing (F).
and the parallel pin (D). Remove the E-ring (E), and remove
the bearing (F).
5)
Remove the screw (G), and remove the earth plate (H), the E-
ring (I), and the bearing (J). Remove the transport roller 2, 4
(Dirve) (K).
ring (I), and the bearing (J). Remove the transport roller 2, 4
(Dirve) (K).
d. Torque limiter
1)
Remove the right lower door, the right cabinet lower, and the
right lower door cover. (Refer to the "[A] EXTERNAL OUT-
FIT".)
right lower door cover. (Refer to the "[A] EXTERNAL OUT-
FIT".)
2)
Remove the waste toner box. (Refer to the “[J] PHOTOCON-
DUCTOR SECTION”.)
DUCTOR SECTION”.)
3)
Remove the tray paper feed unit. (Refer to the "(1) Tray paper
feed unit".)
feed unit".)
Unit
Parts
Mainte
nance
1
Tray paper feed unit
d
Transport roller 2, 4 (Drive)
✕ {
A
B
C
1-c
1-d
Unit
Parts
Mainte
nance
1
Tray paper feed unit
e
Torque limiter
✕
A
B
C
D
E
F
K
G
H
J
I
1-d
1-e
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man30) service manuals if exist.