Read Sharp MX-6201N / MX-7001N (serv.man115) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
2. With reference to the rated value indicated on the label, set the values of Sim08-01, and
Sim08-02 in MIDDLE and LOW/HIGH in this order according to the following
accompanying specification. (Be aware that the setting values of LOW/HIGH may
change if the value of MIDDLE is set up after setting up the values of LOW/HIGH.)
accompanying specification. (Be aware that the setting values of LOW/HIGH may
change if the value of MIDDLE is set up after setting up the values of LOW/HIGH.)
- DV_Bias and Grid_Bias Setting for MX-5500N/6200N/7000N
- DV_Bias and Grid_Bias Setting for MX-6201N/7001N
- DV_Bias and Grid_Bias Setting for MX-6201N/7001N
(NOTES)
1. The two kinds of labels, current and new, are stuck on the MC and DV high-voltage power
supply PWB. On the new label, the value of MIDDLE based on the present alteration is
indicated. (This value is a GBK value that has been added 30 to the GBK value indicated
on the current label.)
indicated. (This value is a GBK value that has been added 30 to the GBK value indicated
on the current label.)
2. The current label has been replaced by the new one from November 2008 production. For
the identification between the current and the new label, the asterisk symbol “*” is placed
behind the manufacturer’s 11-digit item number.
behind the manufacturer’s 11-digit item number.
- MX-5500N/6200N/7000N
The machine stuck with the current label (EUKMBHA03HA):
The present alteration has been made from August 2008 production.
The machine stuck with the new label (EUKMBHA03HA *):
The present alteration has been made in production.
- MX-6201N/7001N
The machine stuck with the current label (EUK1MHA55HA):
The present alteration has been made from August 2008 production.
The machine stuck with the new label (EUK1MHA55HA *):
The present alteration has been made in production.
3. The present alteration has been made in production for the machine stuck with the new
label. For the field, the replacement of the MC and DV high-voltage power supply PWB
requires the settings of the values of Sim08-01 and Sim08-02 according to this report.
requires the settings of the values of Sim08-01 and Sim08-02 according to this report.
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man115) service manuals if exist.